0472 721 234 Get a Quote

Works indoors and outdoors

3 Tonne Telehandler Hire Sydney, 6.9m Lift

Long term hire* from

$190 + GST per day ($209 inc GST)

*Long term rate, on hires of 3 months or more. Rate details

Short-term hire too. A day, a week or a month: get a quote for your dates.

LGMG H730

Max lift height
6.9 m
Max lift capacity
3,000 kg
Max forward reach
4 m
Machine width
2.3 m
  • OutdoorsBest suited
  • IndoorsWorks here too, with ventilation

3 tonne telehandler lifting to 6.9 m with 4 m outreach. Four wheel drive, four wheel steer and a Kubota diesel for loaded work on site.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Price Beat Guarantee. Send us a valid written quote from another Australian hire company for the same or an equivalent machine and we will quote you 5% below its total. We compare the whole quote, including delivery, collection and any fees, not item by item. See the conditions

Long term rate: 7m Telehandler rate group

Rate details and conditions

Lift and place on a compact site machine, on one clear long term rate with no insurance, environmental or hire levies added.

The machine shown

Max lift height
6.9 m
Max lift capacity
3,000 kg
  • No insurance levy
  • No environmental levy
  • No hire levy

Return fuel-powered equipment with the agreed fuel level. Refuelling and damage charges may apply under your hire agreement.

Any delivery and collection is quoted upfront.

This machine is also for sale: see the listing and ask about this unit

Specification sheetPDF, 367 KB, LGMG H730
Download

Overview

About the LGMG H730 Telehandler

Download spec sheet (PDF)

LGMG H730 telehandler features and controls

Features

What sets it apart

  • 3,000kg maximum lift capacity
  • 6.9m maximum lift height with 4m outreach
  • Four-wheel drive and four-wheel steer, 4m turning radius
  • ±5 degree frame tilt to level the load on a slope
  • Kubota 54.6kW (73.2hp) diesel, 24.9km/h top speed
  • Multiple-disc oil-bath brakes on front and rear axles
  • 43kN maximum traction force, 45% gradeability unladen
  • Rough-terrain load chart from 3,000kg down to 950kg at reach
LGMG H730 telehandler working on site

Where it works

Best-fit jobs and sites

  • Loading and unloading deliveries on site; placing bricks, frames and roof sheets at height; moving palletised material over unformed ground; general builder and civil site material handling.

Good to confirm: A telehandler lifts loads, not people. A work platform attachment and the matching licence are required before anyone is lifted. At 2.3 m wide and 6,900 kg, confirm access and ground bearing. Diesel, so not for enclosed indoor use. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. All 17 figures are on file.

Manufacturer spec sheet

Reach

6.9 m
Lift height
6.9 mThe height the forks reach. The load chart sets what may be lifted there.
Forward reach
4 mCapacity falls as the boom extends; plan the furthest placement first.

Access

2.3 m
Machine width
2.3 mVehicle-width access needed.
Stowed height
1.99 mCheck door headers, ducts and awnings on the route in.
Length
5.01 mRoom to turn in corridors and lifts.
Turning radius
4 mTighter is easier in aisles and around racking.

Surface

Rough terrain / 4WD
Ground it suits
Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
Gradeability
45 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

3,000 kg
Rated capacity
3,000 kg

Environment

Diesel
Power
DieselEngine exhaust and noise: best outdoors. Indoors only in large, well-ventilated buildings.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
PneumaticCheck floor finish before it goes on.

Transport

6,900 kg
Weight
6,900 kg
Customer pickup
Ask usDelivered on our truck, quoted with the hire. Want to collect it yourself? Ask and we will check the trailer and tow vehicle with you.

Compliance

In NSW a non-slewing telehandler used with forks or a bucket does not need a high risk work licence, but the operator must be trained and assessed as competent. Fitted with a jib and hook to lift a suspended load, the class CN non-slewing mobile crane licence applies only above 3 tonnes; this machine is rated 3,000 kg. Lifting a person requires an approved work platform attachment, and a boom-type work platform licence (WP) where the boom reaches 11 m or more.
Competency
In NSW a non-slewing telehandler used with forks or a bucket does not need a high risk work licence, but the operator must be trained and assessed as competent. Fitted with a jib and hook to lift a suspended load, the class CN non-slewing mobile crane licence applies only above 3 tonnes; this machine is rated 3,000 kg. Lifting a person requires an approved work platform attachment, and a boom-type work platform licence (WP) where the boom reaches 11 m or more.No high-risk licence for fork work under 3 t. A crane configuration or a work-platform attachment changes the answer; ask before booking.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Lift & reach2 specs
Max lift height
6.9 m
Max forward reach
4 m
Capacity1 spec
Max lift capacity
3,000 kg
Dimensions4 specs
Overall length
5.01 m
Machine width
2.3 m
Stowed height
1.99 m
Turning radius
4 m
Performance4 specs
Gradeability
45 %
Terrain type
Rough terrain / 4WD
Indoor use
Yes, in large, well-ventilated buildings (diesel engine). Best outdoors.
Outdoor use
Yes
Power & drive3 specs
Power
Diesel
Drive type
4WD
Tyre type
Pneumatic
Machine & transport5 specs
Manufacturer
LGMG
Model
H730
Machine weight
6,900 kg
Customer pickup
Delivered on our truck, ask us about collecting
Delivery
Quoted by suburb & access

Also available to buy

LGMG H730 Telehandler For Sale

Buying used? What to check before you buy · Handover and delivery checklist

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Hire guide

Before and during the hire

Delivery, access, charging and daily checks for this machine. Tap a topic.

Dimensions at a glance

Length 5.01 m Stowed 1.99 m
Stowed size (rails down may differ, so check the spec sheet)

The numbers that decide access

Machine width
2.3 m: large machine, so plan vehicle-width access
Stowed height
1.99 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

We deliver this machine on our truck, quoted together with the hire. Keen to collect it yourself? Ask the team and we will check whether a trailer combination suits it.

Comparable machines

Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.

  • Dieci 3t telehandler
  • Merlo 3t telehandler
  • Magni 3t telehandler
  • JCB 3t telehandler
  • Manitou 3t telehandler

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates. Delivered from our Western Sydney depot across Sydney, including Central Coast, Parramatta, Lidcombe and Homebush and Sydney CBD.

Heaviest load and furthest placement

Tell us the heaviest load, how high and how far it has to go, and what the ground is like. We read the load chart for the attachment and confirm the machine before it is loaded.

Licence and competency

In NSW a non-slewing telehandler used with forks or a bucket does not need a high risk work licence, but the operator must be trained and assessed as competent. Fitted with a jib and hook to lift a suspended load, the class CN non-slewing mobile crane licence applies only above 3 tonnes; this machine is rated 3,000 kg. Lifting a person requires an approved work platform attachment, and a boom-type work platform licence (WP) where the boom reaches 11 m or more.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Pre-start checks, every day

A telehandler is checked as a load-handling machine, not as a work platform. The load chart for the attachment fitted decides what it may lift.

Swipe

1

Walk around

0/6
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Before it arrives

A telehandler is judged on the load chart and the ground. Sort both before it arrives.

Swipe

1

Read the load chart first

Weight, height and reach together decide what this machine can place. Have the heaviest load and the furthest placement written down before it arrives.

2

Walk the ground

Compacted and trafficable, with the bearing capacity for a loaded machine. Mark trenches, pits and services, and keep the boom out of the exclusion zone for power lines.

3

Plan the set-up and exclusion zone

Room to level the frame where loads are placed, and a zone nobody walks through under a suspended or raised load.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about gates, height limits and steep access when you book.

5

Attachments

Forks as standard. If you need a different attachment, tell us at booking so the right load chart travels with the machine.

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Planning on the headline capacity

The maximum rated load is at minimum height and reach. At full extension the chart figure is a fraction of it.

Travelling with the boom up

Boom retracted and low to travel. A raised boom on a slope or soft ground is how these machines tip.

Using it as a work platform

A telehandler lifts materials. Lifting people needs an approved work-platform attachment and the operator competency that goes with it.

Leaving inductions to delivery morning

Managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer documents for this model. Swipe or scroll sideways to see them all.

Manufacturer specification sheetPDF, 367 KB, LGMG H730
Download

Questions about hiring this machine

How high can the LGMG H730 lift?

Maximum lift height is 6.9 m and maximum rated capacity is 3,000 kg. They are not available together: as the boom extends and rises, the load it may carry falls. The load chart for the fitted attachment sets what it can lift at each height and reach.

What can it lift at reach?

Rated capacity is 3,000 kg at its rated load centre, close in and low. At height or reach it is less: read the load chart for the attachment fitted, with the load centre of your actual load. Tell us the load weight, its size and where it has to go, and we will check it against the chart.

Does maximum reach come with maximum capacity?

No. Maximum reach and maximum capacity never occur together. The load chart sets the safe load for each combination of boom angle and extension. The specification sheet has the figures for this model.

What ground conditions suit it?

It is built for construction ground: compacted, reasonably level site pads, road base and firm dirt. Soft, wet or disturbed ground still has to be assessed, and it must be set up and used on ground that can carry its weight, with the machine level before lifting.

How much setup space does it need?

Allow space to turn, extend and set the load down, a firm unloading area for the delivery truck, and clearance from overhead lines and structures.

Which forks or attachments are supplied?

The attachments supplied with this machine are confirmed on your quote. Tell us what you are lifting (pallets, bags, bulk material) so the right attachment is quoted. Forks never permit lifting people: that needs a work platform attachment approved for this machine.

What fuel does it use?

It runs on diesel. How refuelling is handled on your hire is confirmed with the quote.

How heavy is it, and can my floor take it?

It weighs about 6,900 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

Delivery is from our Western Sydney depot. Delivery is quoted with the machine for your suburb, site access and hire dates. We deliver it on our truck. Keen to collect it yourself? Ask us and we will check the trailer and tow vehicle with you.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $190 + GST ($209 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

SafeWork NSW says no high risk work licence is needed when a telehandler is fitted with forks or a bucket, but operators must be trained for it. A licence is needed when it is used with a hook and crane jib to lift loads over 3 tonnes, or has a slewing function or a work box with controls and a boom over 11 metres. The attachment and the task decide which applies. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Dieci Apollo 25.6 2.5t telehandler with the boom raised and extended Hire
  • 5.78 mLift height
  • 2,500 kgLift capacity
  • 3.25 mForward reach
  • 1.85 mOverall width

Telehandlers

Dieci Apollo 25.6 Telehandler

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $190/day + GST

2.5 tonne telehandler with a 5.78 m lift height and 3.25 m forward reach. A compact fixed boom machine for residential and fit-out sites.

LGMG H625 telehandler, three-quarter view Hire
  • 5.94 mLift height
  • 2,500 kgLift capacity
  • 3.41 mForward reach
  • 1.86 mOverall width

Telehandlers

LGMG H625 Telehandler

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $190/day + GST

Compact 2.5 tonne telehandler. 5.94m lift height, 3.41m outreach, 1.86m wide and 1.97m high for gateways and hoardings.

LGMG H1440 4 t telehandler with the boom raised and extended Hire
  • 13.6 mLift height
  • 4,000 kgLift capacity
  • 9.22 mForward reach
  • 2.44 mOverall width

Telehandlers

LGMG H1440 Telehandler

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $250/day + GST

4 tonne telehandler. 13.6m lift height, 9.22m outreach, hydraulic outriggers, four-wheel drive and four-wheel steer. Perkins diesel, 12,050kg, float delivery.

How the H730 compares

Of the similar machines we hire, the H730 is the biggest platform load at 3,000 kg, the highest reach at 6.9 m working height.

MachineWorking heightWidthWeightPlatform loadPower
H730 3t Telehandler H730 (this one) 6.9 m2.3 m 6,900 kg3,000 kg Diesel
H625 2.5t Telehandler H625 5.94 m– 5,050 kg2,500 kg Diesel
Apollo 25.6 2.5t Telehandler Apollo 25.6 5.78 m1.85 m 5,100 kg2,500 kg Diesel

Get a quote for the LGMG H730 Telehandler

6.9 m working height, 2.3 m wide, 3,000 kg capacity. Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote