Rough terrain / 4WD
Long-term hireFrom $190/day on a hire of 3 months or longer What the rate covers
LGMG H625
Compact 2.5 tonne telehandler. 5.94m lift height, 3.41m outreach, 1.86m wide and 1.97m high for gateways and hoardings. Four-wheel drive and four-wheel steer, Kubota diesel.
Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.
Long-term hire
From $190/day on 3+ month hire
Minimum hire 3 months or longer
Lift and place on a compact site machine, on one clear long-term rate with no insurance, environmental or hire levies added.
3 machines on this rate
Any delivery and collection is quoted upfront.
This machine is also for sale, see condition, hours and price
Overview
The LGMG H625 is the compact telehandler in the Equip Hire fleet: 2,500kg rated capacity to a 5.94m maximum lift height, with 3.41m of horizontal outreach. At 1.86m wide and 1.97m high it passes through gateways, carports and site hoardings that stop a full-size machine, and a 3.36m turning radius with four-wheel drive and four-wheel steer keeps it working on a townhouse block. Frame tilt of plus or minus 5 degrees levels the load across a crossfall. A 54.6kW Kubota diesel drives two forward and two reverse gears to 24.9km/h with 39kN of traction force; the front axle runs multi-disc wet brakes. It weighs 5,050kg on 12-16.5 tyres and has no outriggers, so the rough terrain load chart printed on the specification sheet is the one chart for every lift. Every figure is taken from the LGMG H625 specification sheet held on file.
Decision panel
Seven questions, answered from this machine’s verified specifications. 8 still to confirm with the hire team.
A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.
Specifications
Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.
Also available to buy
Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.
Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.
All machines for saleTransport
Swipe
Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.
Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.
Logistics
What we need from you, and what we take care of.
Swipe
Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.
Tell us the heaviest load, how high and how far it has to go, and what the ground is like. We read the load chart for the attachment and confirm the machine before it is loaded.
Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.
Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.
Safety
A telehandler is checked as a load-handling machine, not as a work platform. The load chart for the attachment fitted decides what it may lift.
Swipe
Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.
Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.
Site prep
A telehandler is judged on the load chart and the ground. Sort both before it arrives.
Swipe
Weight, height and reach together decide what this machine can place. Have the heaviest load and the furthest placement written down before it arrives.
Compacted and trafficable, with the bearing capacity for a loaded machine. Mark trenches, pits and services, and keep the boom out of the exclusion zone for power lines.
Room to level the frame where loads are placed, and a zone nobody walks through under a suspended or raised load.
Room for the truck to stop and unload safely. Tell us about gates, height limits and steep access when you book.
Forks as standard. If you need a different attachment, tell us at booking so the right load chart travels with the machine.
Avoid
The things that most often send a machine back or hold up a job.
Swipe
The maximum rated load is at minimum height and reach. At full extension the chart figure is a fraction of it.
Boom retracted and low to travel. A raised boom on a slope or soft ground is how these machines tip.
A telehandler lifts materials. Lifting people needs an approved work-platform attachment and the operator competency that goes with it.
Managed sites need the paperwork approved before the truck arrives.
Telehandlers
Long-term hireFrom $190/day on 3+ month hire
2.5 tonne telehandler with a 5.78 m lift height and 3.25 m forward reach. A compact fixed boom machine for residential and fit-out sites.
Telehandlers
Long-term hireFrom $190/day on 3+ month hire
3 tonne telehandler lifting to 6.9 m with 4 m outreach. Four wheel drive, four wheel steer and a Kubota diesel for loaded work on site.
Telehandlers
4 tonne telehandler. 13.6m lift height, 9.22m outreach, hydraulic outriggers, four-wheel drive and four-wheel steer. Perkins diesel, 12,050kg, float delivery.
Tell us the job, the dates and the suburb. We will quote the machine and delivery together.
Your download has started
Working height, not platform height
This machine is rated at 5.94 m (about 19 feet). Working height is what a person can reach from the platform, not the height of the platform floor. The difference is roughly two metres, and it is the figure most quotes get wrong.
A spec sheet answers what the machine does. It cannot tell you whether it fits your gate, your ground or your slab, so ask us. Two details is enough.
We will come back to you on the details you gave. Your PDF has downloaded already.
Get a hire quote for this machine
