Equipment for sale
LGMG H730 Telehandler For Sale
LGMG H730
3 tonne telehandler lifting to 6.9 m with 4 m outreach. Four wheel drive, four wheel steer and a Kubota diesel for loaded work on site.
Price on application
Overview
About this machine
The specifications for this unit are below. Condition, hours and price are confirmed on enquiry, and you are welcome to inspect it at Berkshire Park.
Features
What sets it apart
- 3,000kg maximum lift capacity
- 6.9m maximum lift height with 4m outreach
- Four-wheel drive and four-wheel steer, 4m turning radius
- ±5 degree frame tilt to level the load on a slope
- Kubota 54.6kW (73.2hp) diesel, 24.9km/h top speed
- Multiple-disc oil-bath brakes on front and rear axles
- 43kN maximum traction force, 45% gradeability unladen
- Rough-terrain load chart from 3,000kg down to 950kg at reach
Where it works
Best-fit jobs and sites
- Loading and unloading deliveries on site; placing bricks, frames and roof sheets at height; moving palletised material over unformed ground; general builder and civil site material handling.
Good to confirm: A telehandler lifts loads, not people. A work platform attachment and the matching licence are required before anyone is lifted. At 2.3 m wide and 6,900 kg, confirm access and ground bearing. Diesel, so not for enclosed indoor use. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.
Decision panel
Will it suit this job?
Seven questions about this job, answered from this machine's verified specifications. All 17 figures are on file.
Reach
- Lift height
- 6.9 mThe height the forks reach. The load chart sets what may be lifted there.
- Forward reach
- 4 mCapacity falls as the boom extends; plan the furthest placement first.
Access
- Machine width
- 2.3 mVehicle-width access needed.
- Stowed height
- 1.99 mCheck door headers, ducts and awnings on the route in.
- Length
- 5.01 mRoom to turn in corridors and lifts.
- Turning radius
- 4 mTighter is easier in aisles and around racking.
Surface
- Ground it suits
- Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
- Gradeability
- 45 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
- Outriggers
- NoStabilisers the machine sets down before it lifts, where fitted.
Load
- Rated capacity
- 3,000 kg
Environment
- Power
- DieselEngine exhaust and noise: outdoor, ventilated sites only.
- Indoor / outdoor
- OutdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
- Tyres
- PneumaticCheck floor finish before it goes on.
Transport
- Weight
- 6,900 kg
- Freight
- Quoted to your locationOr collect from our Berkshire Park depot by arrangement.
Compliance
- Competency
- In NSW a non-slewing telehandler used with forks or a bucket does not need a high risk work licence, but the operator must be trained and assessed as competent. Fitted with a jib and hook to lift a suspended load, the class CN non-slewing mobile crane licence applies only above 3 tonnes; this machine is rated 3,000 kg. Lifting a person requires an approved work platform attachment, and a boom-type work platform licence (WP) where the boom reaches 11 m or more.No high-risk licence for fork work under 3 t. A crane configuration or a work-platform attachment changes the answer; ask before booking.
- Documents
- Manufacturer spec sheet on fileThe sheet governs every figure above.
A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.
Specifications
Full specifications
Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.
Lift & reach2 specs
- Max lift height
- 6.9 m
- Max forward reach
- 4 m
Capacity1 spec
- Max lift capacity
- 3,000 kg
Dimensions4 specs
- Overall length
- 5.01 m
- Machine width
- 2.3 m
- Stowed height
- 1.99 m
- Turning radius
- 4 m
Performance4 specs
- Gradeability
- 45 %
- Terrain type
- Rough terrain / 4WD
- Indoor use
- No
- Outdoor use
- Yes
Power & drive3 specs
- Power
- Diesel
- Drive type
- 4WD
- Tyre type
- Pneumatic
Machine & transport5 specs
- Manufacturer
- LGMG
- Model
- H730
- Machine weight
- 6,900 kg
- Freight
- Quoted to your location
Dimensions at a glance
The numbers that decide access
- Machine width
- 2.3 m: large machine, so plan vehicle-width access
- Stowed height
- 1.99 m: check door headers, ducts and awnings on the route in
Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.
Condition and price
This machine
Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.
Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.
All machines for saleComparable machines
Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.
- Dieci 3t telehandler
- Merlo 3t telehandler
- Magni 3t telehandler
- JCB 3t telehandler
- Manitou 3t telehandler
Buying
Inspection, transport and handover
What happens between your enquiry and the machine arriving.
Swipe
Inspection
The machine is at our Berkshire Park depot in Western Sydney and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.
Transport
We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.
Licence and competency
In NSW a non-slewing telehandler used with forks or a bucket does not need a high risk work licence, but the operator must be trained and assessed as competent. Fitted with a jib and hook to lift a suspended load, the class CN non-slewing mobile crane licence applies only above 3 tonnes; this machine is rated 3,000 kg. Lifting a person requires an approved work platform attachment, and a boom-type work platform licence (WP) where the boom reaches 11 m or more.
What comes with it
Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.
Want to see it first?
Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.
Safety
Pre-start checks, every day
A telehandler is checked as a load-handling machine, not as a work platform. The load chart for the attachment fitted decides what it may lift.
Swipe
Walk around
0/6Power on
0/3Function test
0/3Found a fault?
Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.
What counts as the record
Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.
Site prep
Before it arrives
A telehandler is judged on the load chart and the ground. Sort both before it arrives.
Swipe
Read the load chart first
Weight, height and reach together decide what this machine can place. Have the heaviest load and the furthest placement written down before it arrives.
Walk the ground
Compacted and trafficable, with the bearing capacity for a loaded machine. Mark trenches, pits and services, and keep the boom out of the exclusion zone for power lines.
Plan the set-up and exclusion zone
Room to level the frame where loads are placed, and a zone nobody walks through under a suspended or raised load.
Make delivery space
Room for the truck to stop and unload safely. Tell us about gates, height limits and steep access when you book.
Attachments
Forks as standard. If you need a different attachment, tell us at booking so the right load chart travels with the machine.
Avoid
Mistakes we see weekly
The things that most often send a machine back or hold up a job.
Swipe
Planning on the headline capacity
The maximum rated load is at minimum height and reach. At full extension the chart figure is a fraction of it.
Travelling with the boom up
Boom retracted and low to travel. A raised boom on a slope or soft ground is how these machines tip.
Using it as a work platform
A telehandler lifts materials. Lifting people needs an approved work-platform attachment and the operator competency that goes with it.
Leaving inductions to delivery morning
Managed sites need the paperwork approved before the truck arrives.
Documents
Buying this machine: questions answered
How high can the LGMG H730 lift?
Maximum lift height is 6.9 m and maximum rated capacity is 3,000 kg. They are not available together: as the boom extends and rises, the load it may carry falls. The load chart for the fitted attachment sets what it can lift at each height and reach.
What can it lift at reach?
Rated capacity is 3,000 kg at its rated load centre, close in and low. At height or reach it is less: read the load chart for the attachment fitted, with the load centre of your actual load. Tell us the load weight, its size and where it has to go, and we will check it against the chart.
Does maximum reach come with maximum capacity?
No. Maximum reach and maximum capacity never occur together. The load chart sets the safe load for each combination of boom angle and extension. The specification sheet has the figures for this model.
What ground conditions suit it?
It is built for construction ground: compacted, reasonably level site pads, road base and firm dirt. Soft, wet or disturbed ground still has to be assessed, and it must be set up and used on ground that can carry its weight, with the machine level before lifting.
How much setup space does it need?
Allow space to turn, extend and set the load down, a firm unloading area for the delivery truck, and clearance from overhead lines and structures.
Which forks or attachments are supplied?
The attachments supplied with this machine are confirmed on your quote. Tell us what you are lifting (pallets, bags, bulk material) so the right attachment is quoted. Forks never permit lifting people: that needs a work platform attachment approved for this machine.
What fuel does it use?
It runs on diesel. How refuelling is handled on your hire is confirmed with the quote.
How heavy is it, and can my floor take it?
It weighs about 6,900 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.
Is this a specific machine, and what is included?
What is included (charger, manuals, keys) is listed on the quote.
What year is it, how many hours, and what condition?
Anything not shown here is confirmed in writing before purchase. Service history is available on request.
Is the figure shown a purchase price, and is GST included?
The price is given on application: ask for a current price for this machine. Freight is quoted separately.
Can I inspect it before buying?
Ask to arrange an inspection; the time and place are confirmed by the team.
Does it come with a warranty?
Any warranty is stated in writing on the quote. None is implied by this listing.
Can you deliver it to me?
Sale enquiries for listed machines are accepted Australia wide. Freight is quoted to your location, or you can collect it from our Berkshire Park depot by arrangement.
What documents come with it?
The specification sheet is available now. The operator's manual and the handover inspection record are supplied at handover.
Enquire about the LGMG H730 Telehandler
Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.
Looking to hire this machine instead? See hire details and delivery