Equipment for sale
JLG ES1932
19ft JLG electric scissor lift, 7.8m working height, 230kg capacity, non-marking tyres and zero inside turning radius — the go-to indoor machine.
Price on application
This machine is also available to hire, see hire details and delivery
Overview
Where it works
Good to confirm: Solid non-marking tyres and low clearance — smooth, firm surfaces only. Not for outdoor rough ground. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.
Decision panel
Seven questions, answered from this machine’s verified specifications. 3 still to confirm with the hire team.
A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.
At a glance
| Specification | Verified value | Site suitability |
|---|---|---|
| Working height | 7.8 m | Measure the task height, including anything overhead, before booking. |
| Platform capacity | 230 kg | Rating includes operators, tools and materials. Do not exceed the plate rating. |
| Overall width | 0.81 m | Narrow enough to be considered for a standard single doorway. Measure the actual opening, and the path to it, before delivery. |
| Machine weight | 1,550 kg | Confirm slab, suspended floor or ground bearing capacity for this weight before use. |
| Indoor use | Yes | Considered for indoor work, subject to floor loading and access clearances. |
| Power | Electric | Battery electric drive produces no engine exhaust at the point of use. Charging access is required. |
| Terrain | Indoor // hard standing | Confirm with the hire team |
Figures are taken from the manufacturer specification sheet for this model. Site suitability notes are general guidance: the site, the surface, the operator and the task decide what is safe on the day.
Specifications
Grouped for quick scanning, a row appears once its figure is verified for this machine. The manufacturer spec sheet always takes precedence.
Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.
Also available to buy
Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.
Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.
All machines for saleBuying
What happens between your enquiry and the machine arriving.
Swipe
The machine is at our Berkshire Park depot in Western Sydney and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.
We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) is the accepted operator competency.
Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.
Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.
Power
Battery electric, charged from a normal household power point.
Swipe
4 x 6V 220Ah
Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.
The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire. 27A onboard (240V outlet)
About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.
Safety
Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.
Swipe
Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.
Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.
Site prep
Five minutes of checking here is what keeps a delivery from becoming a return trip.
Swipe
Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.
A ground-bearing slab is fine. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.
Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.
Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.
A live outlet near overnight parking so every day starts on a full charge.
Avoid
The things that most often send a machine back or hold up a job.
Swipe
Measure to the actual task height, then choose the machine. Nothing added “just in case”.
An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.
Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.
Shopping centres and managed sites need the paperwork approved before the truck arrives.
Electric Scissor Lifts
Haulotte Compact 8N
26ft narrow electric scissor lift, 9.8m working height, 250kg, 0.81m wide — 26ft of reach through a standard doorway.
Electric Scissor Lifts
Skyjack SJIII 3226
26ft narrow electric scissor lift, 9.75m working height, 227kg, 0.81m wide with a 0.91m roll-out deck.
Electric Scissor Lifts
Zoomlion ZS0808AC
26ft narrow electric scissor lift for greater working height through standard doorways — indoor and hard-surface work.
Compare all electric scissor lifts or browse the full fleet.
Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.
Looking to hire this machine instead? See hire details and delivery
Your download has started
Working height, not platform height
This machine is rated at 7.8 m (about 26 feet). Working height is what a person can reach from the platform, not the height of the platform floor. The difference is roughly two metres, and it is the figure most quotes get wrong.
A spec sheet answers what the machine does. It cannot tell you whether it fits your gate, your ground or your slab, so ask us. Two details is enough.
We will come back to you on the details you gave. Your PDF has downloaded already.
Get a hire quote for this machine
