0472 721 234 Get a Quote

Equipment for sale

LGMG H625 Telehandler For Sale

LGMG H625

Max lift height
5.94 m
Max lift capacity
2,500 kg
Max forward reach
3.41 m
Machine width
1.86 m
  • OutdoorsBest suited
  • IndoorsWorks here too, with ventilation

Compact 2.5 tonne telehandler. 5.94m lift height, 3.41m outreach, 1.86m wide and 1.97m high for gateways and hoardings. Four-wheel drive and four-wheel steer, Kubota diesel.

Price on application

We confirm this unit’s hours, condition and year when you ask.

Photos are our fleet photos of this model. Ask for current photos of this unit.

Hire this machine instead

Specification sheetPDF, 412 KB, LGMG H625
Download

Overview

About this machine

The specifications for this unit are below. Condition, hours and price are confirmed on enquiry, and you are welcome to inspect it at Berkshire Park.

LGMG H625 telehandler working on site

Where it works

Best-fit jobs and sites

  • Unloading and placing pallets and materials on residential, landscaping and fit-out sites, feeding scaffold and first-floor levels, and yard handling where a full-size telehandler will not fit.

Good to confirm: Read the load chart at the reach and height being used, not the headline 2,500 kg: capacity falls as the boom extends. Lifts stay within the ±5° tilt limit on the manufacturer sheet. Diesel engine, so outdoor and well ventilated use only. Weighs 5,050 kg: truck delivery. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. All 14 figures are on file.

Manufacturer spec sheet

Reach

5.94 m
Lift height
5.94 mThe height the forks reach. The load chart sets what may be lifted there.
Forward reach
3.41 mCapacity falls as the boom extends; plan the furthest placement first.

Access

1.86 m
Machine width
1.86 mVehicle-width access needed.
Stowed height
1.97 mCheck door headers, ducts and awnings on the route in.
Length
3.99 mRoom to turn in corridors and lifts.

Surface

Rough terrain / 4WD
Ground it suits
Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
Gradeability
45 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.

Load

2,500 kg
Rated capacity
2,500 kg

Environment

Diesel
Power
DieselEngine exhaust and noise: best outdoors. Indoors only in large, well-ventilated buildings.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.

Transport

5,050 kg
Weight
5,050 kg
Freight
Quoted to your locationOr collect from our Western Sydney depot by arrangement.

Compliance

Non-slewing telehandler rated 2,500 kg, under the 3 tonne threshold, so no non-slewing mobile crane high risk work licence (class CN) is required in NSW to place a load on the forks. Verification of competency still applies. Read the load chart at reach before every lift.
Competency
Non-slewing telehandler rated 2,500 kg, under the 3 tonne threshold, so no non-slewing mobile crane high risk work licence (class CN) is required in NSW to place a load on the forks. Verification of competency still applies. Read the load chart at reach before every lift.No high-risk licence for fork work under 3 t. A crane configuration or a work-platform attachment changes the answer; ask before booking.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Lift & reach2 specs
Max lift height
5.94 m
Max forward reach
3.41 m
Capacity1 spec
Max lift capacity
2,500 kg
Dimensions3 specs
Overall length
3.99 m
Machine width
1.86 m
Stowed height
1.97 m
Performance4 specs
Gradeability
45 %
Terrain type
Rough terrain / 4WD
Indoor use
Yes, in large, well-ventilated buildings (diesel engine). Best outdoors.
Outdoor use
Yes
Power & drive2 specs
Power
Diesel
Drive type
4WD
Machine & transport5 specs
Manufacturer
LGMG
Model
H625
Machine weight
5,050 kg
Freight
Quoted to your location

Dimensions at a glance

Length 3.99 m Stowed 1.97 m
Stowed size (rails down may differ, so check the spec sheet)

The numbers that decide access

Machine width
1.86 m: large machine, so plan vehicle-width access
Stowed height
1.97 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Condition and price

This machine

Buying used? What to check before you buy · Handover and delivery checklist

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Buying

Inspection, transport and handover

What happens between your enquiry and the machine arriving.

Swipe

Inspection

The machine is at our Western Sydney depot and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.

Transport

We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.

Licence and competency

Non-slewing telehandler rated 2,500 kg, under the 3 tonne threshold, so no non-slewing mobile crane high risk work licence (class CN) is required in NSW to place a load on the forks. Verification of competency still applies. Read the load chart at reach before every lift.

What comes with it

Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.

Want to see it first?

Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.

Safety

Pre-start checks, every day

A telehandler is checked as a load-handling machine, not as a work platform. The load chart for the attachment fitted decides what it may lift.

Swipe

1

Walk around

0/6
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

A telehandler is judged on the load chart and the ground. Sort both before it arrives.

Swipe

1

Read the load chart first

Weight, height and reach together decide what this machine can place. Have the heaviest load and the furthest placement written down before it arrives.

2

Walk the ground

Compacted and trafficable, with the bearing capacity for a loaded machine. Mark trenches, pits and services, and keep the boom out of the exclusion zone for power lines.

3

Plan the set-up and exclusion zone

Room to level the frame where loads are placed, and a zone nobody walks through under a suspended or raised load.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about gates, height limits and steep access when you book.

5

Attachments

Forks as standard. If you need a different attachment, tell us at booking so the right load chart travels with the machine.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Planning on the headline capacity

The maximum rated load is at minimum height and reach. At full extension the chart figure is a fraction of it.

Travelling with the boom up

Boom retracted and low to travel. A raised boom on a slope or soft ground is how these machines tip.

Using it as a work platform

A telehandler lifts materials. Lifting people needs an approved work-platform attachment and the operator competency that goes with it.

Leaving inductions to delivery morning

Managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer documents for this model. Swipe or scroll sideways to see them all.

Manufacturer specification sheetPDF, 412 KB, LGMG H625
Download

Buying this machine: questions answered

How high can the LGMG H625 lift?

Maximum lift height is 5.9 m and maximum rated capacity is 2,500 kg. They are not available together: as the boom extends and rises, the load it may carry falls. The load chart for the fitted attachment sets what it can lift at each height and reach.

What can it lift at reach?

Rated capacity is 2,500 kg at its rated load centre, close in and low. At height or reach it is less: read the load chart for the attachment fitted, with the load centre of your actual load. Tell us the load weight, its size and where it has to go, and we will check it against the chart.

Does maximum reach come with maximum capacity?

No. Maximum reach and maximum capacity never occur together. The load chart sets the safe load for each combination of boom angle and extension. The specification sheet has the figures for this model.

What ground conditions suit it?

It is built for construction ground: compacted, reasonably level site pads, road base and firm dirt. Soft, wet or disturbed ground still has to be assessed, and it must be set up and used on ground that can carry its weight, with the machine level before lifting.

How much setup space does it need?

Allow space to turn, extend and set the load down, a firm unloading area for the delivery truck, and clearance from overhead lines and structures.

Which forks or attachments are supplied?

The attachments supplied with this machine are confirmed on your quote. Tell us what you are lifting (pallets, bags, bulk material) so the right attachment is quoted. Forks never permit lifting people: that needs a work platform attachment approved for this machine.

What fuel does it use?

It runs on diesel. How refuelling is handled on your hire is confirmed with the quote.

How heavy is it, and can my floor take it?

It weighs about 5,050 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Is this a specific machine, and what is included?

What is included (charger, manuals, keys) is listed on the quote.

What year is it, how many hours, and what condition?

Anything not shown here is confirmed in writing before purchase. Service history is available on request.

Is the figure shown a purchase price, and is GST included?

The price is given on application: ask for a current price for this machine. Freight is quoted separately.

Can I inspect it before buying?

Ask to arrange an inspection; the time and place are confirmed by the team.

Does it come with a warranty?

Any warranty is stated in writing on the quote. None is implied by this listing.

Can you deliver it to me?

Sale enquiries for listed machines are accepted Australia wide. Freight is quoted to your location, or you can collect it from our Western Sydney depot by arrangement.

What documents come with it?

The specification sheet is available now. The operator's manual and the handover inspection record are supplied at handover.

Enquire about the LGMG H625 Telehandler

Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.

Looking to hire this machine instead? See hire details and delivery

CallEnquire to Purchase