0472 721 234 Get a Quote

Equipment for sale

26ft Electric Vertical Mast Lift for Sale

LGMG M0810JE

Working height
10 m
Machine width
1 m
Platform capacity
200 kg
Platform height
8 m
  • IndoorsBest suited
  • OutdoorsWorks here too, on firm level ground

26ft vertical mast lift with a jib: 8m platform height and 10m (33ft) working height, 3.2m horizontal outreach, zero tail swing and a 1m wide chassis for indoor up-and-over work.

Price on application

We confirm this unit’s hours, condition and year when you ask.

Photos are our fleet photos of this model. Ask for current photos of this unit.

Hire this machine instead

Specification sheetPDF, 362 KB, LGMG M0810JE
Download

Overview

About this machine

The specifications for this unit are below. Condition, hours and price are confirmed on enquiry, and you are welcome to inspect it at Berkshire Park.

LGMG M0810JE vertical mast lift features and controls

Features

What sets it apart

  • 10m working height, 8m platform height
  • 3.2m horizontal outreach with 6.6m up-and-over clearance
  • Zero tail swing and 345 degree turntable rotation
  • 1m wide, 2.6m long and 1.99m stowed: measure the opening, it is wider than a standard 0.82m personnel door
  • 2 people, 200kg platform capacity
  • Full-height drive with proportional controls
  • AC power to the platform
  • Solid non-marking tyres, 24V 250Ah electric drive
LGMG M0810JE vertical mast lift working on site

Where it works

Best-fit jobs and sites

  • Indoor maintenance around racking and plant; electrical, lighting and services work; warehouse and factory fit-outs; up-and-over access in aisles where a scissor lift cannot reach.

Good to confirm: 200kg platform capacity, lighter than a scissor lift of the same height. Solid non-marking tyres and 100mm ground clearance: firm, level surfaces only. Not a rough-terrain machine. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. All 17 figures are on file.

Manufacturer spec sheet

Reach

10 m
Working height
10 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
8 mThe platform floor at full height, about 2 m below working height.
Horizontal outreach
3.2 mHow far the basket reaches out from the machine. Full outreach is not available at full height; check the envelope chart.

Access

1 m
Machine width
1 mNeeds double doors or gate access.
Stowed height
1.99 mCheck door headers, ducts and awnings on the route in.
Length
2.6 mRoom to turn in corridors and lifts.

Surface

Indoor / hard standing
Ground it suits
Indoor / hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
25 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

200 kg
Platform capacity
200 kg

Environment

Electric
Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Confirm the charging supply on site with us before delivery.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking: safe on finished floors.

Transport

2,720 kg
Weight
2,720 kg
Freight
Quoted to your locationOr collect from our Western Sydney depot by arrangement.

Compliance

Vertical mast lift with a jib and a 10 m working height. The WP high-risk work licence applies to boom-type EWPs with a boom of 11 m or more, so even treated as boom-type this machine needs no licence in NSW. EWPA Yellow Card (boom / vertical lift) is the accepted operator competency, and a harness with lanyard must be worn in the platform.
Competency
Vertical mast lift with a jib and a 10 m working height. The WP high-risk work licence applies to boom-type EWPs with a boom of 11 m or more, so even treated as boom-type this machine needs no licence in NSW. EWPA Yellow Card (boom / vertical lift) is the accepted operator competency, and a harness with lanyard must be worn in the platform.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
10 m
Platform height
8 m
Horizontal outreach
3.2 m
Capacity2 specs
Platform capacity
200 kg
Maximum occupants
2
Dimensions3 specs
Overall length
2.6 m
Machine width
1 m
Stowed height
1.99 m
Performance4 specs
Gradeability
25 %
Terrain type
Indoor / hard standing
Indoor use
Yes
Outdoor use
Yes, on firm, level hard standing within its wind rating. Best indoors.
Power & drive4 specs
Power
Electric
Battery
24V 250Ah
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
LGMG
Model
M0810JE
Machine weight
2,720 kg
Freight
Quoted to your location

Dimensions at a glance

Length 2.6 m Stowed 1.99 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 8 m Working 10 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
1 m: needs double doors or gate access
Stowed height
1.99 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Condition and price

This machine

Buying used? What to check before you buy · Handover and delivery checklist

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Comparable machines

Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.

  • Haulotte Star 10 vertical mast lift
  • JLG Toucan mast boom lift
  • Manitou 100 VJR vertical mast lift
  • Genie vertical mast lift
  • Skyjack vertical mast lift
  • Sinoboom vertical mast lift

Buying

Inspection, transport and handover

What happens between your enquiry and the machine arriving.

Swipe

Inspection

The machine is at our Western Sydney depot and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.

Transport

We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.

Licence and competency

Vertical mast lift with a jib and a 10 m working height. The WP high-risk work licence applies to boom-type EWPs with a boom of 11 m or more, so even treated as boom-type this machine needs no licence in NSW. EWPA Yellow Card (boom / vertical lift) is the accepted operator competency, and a harness with lanyard must be worn in the platform.

What comes with it

Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.

Want to see it first?

Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.

Power

Charging this machine

Battery electric: charge it at the end of every shift.

Swipe

Batteries

24V 250Ah

Charging supply

The charger supply for this machine is confirmed with your quote. Tell us what power is available where it will park overnight (and whether it is temporary site power), and we check it matches before delivery.

Battery condition

Ask us for this unit’s battery age and condition and its charger details before you buy. We confirm them on enquiry.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab usually suits it. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer documents for this model. Swipe or scroll sideways to see them all.

Manufacturer specification sheetPDF, 362 KB, LGMG M0810JE
Download

Buying this machine: questions answered

How high can the LGMG M0810JE reach?

Working height is 10 m and the platform floor rises to 8 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 1 m wide and 2.6 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 1.99 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 200 kg, with up to 2 people. People, tools and materials all count.

Some models allow fewer people outdoors than indoors; the decal on the platform and the manual give the limit for each condition.

Can it reach over an obstacle?

A vertical mast lift goes straight up, and this model has a jib for a small amount of up-and-over reach. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What surfaces can it be used on?

It is built for firm, level, hard surfaces: concrete floors, sealed paving and slabs. It is not for grass, gravel, mud or uneven ground. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

It is rated for outdoor use. The maximum wind speed for this model is confirmed from its manual before outdoor work. Electric power means no exhaust indoors, but electric power alone does not make a machine rated for outdoor use.

Can it work on a slope?

Gradeability of 25% is the steepest slope it can drive up while stowed. That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

How is it charged?

It runs on batteries (24V 250Ah). You need a standard power outlet near where it is parked, and it should be charged at the end of each day. Ask us if your site power is limited or temporary.

How long does a charge last?

Runtime depends on how far it drives, how often it lifts, the load, temperature and battery age, so there is no fixed number of hours. Plan to charge it every night, and tell us if your work involves a lot of driving between work areas.

How heavy is it, and can my floor take it?

It weighs about 2,720 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a vertical mast lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

Is this a specific machine, and what is included?

What is included (charger, manuals, keys) is listed on the quote.

What year is it, how many hours, and what condition?

Anything not shown here is confirmed in writing before purchase. Service history is available on request.

Is the figure shown a purchase price, and is GST included?

The price is given on application: ask for a current price for this machine. Freight is quoted separately.

Can I inspect it before buying?

Ask to arrange an inspection; the time and place are confirmed by the team.

Does it come with a warranty?

Any warranty is stated in writing on the quote. None is implied by this listing.

Can you deliver it to me?

Sale enquiries for listed machines are accepted Australia wide. Freight is quoted to your location, or you can collect it from our Western Sydney depot by arrangement.

What documents come with it?

The specification sheet is available now. The operator's manual and the handover inspection record are supplied at handover.

Enquire about the LGMG M0810JE Vertical Mast Lift

Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.

Looking to hire this machine instead? See hire details and delivery

CallEnquire to Purchase