0472 721 234 Get a Quote

Works indoors and outdoors

22ft Tracked Electric Scissor Lift Hire in Sydney

Long term hire* from

$150 + GST per day ($165 inc GST)

*Long term rate, on hires of 3 months or more. Rate details

Short-term hire too. A day, a week or a month: get a quote for your dates.

LGMG SC0610EL-2

Working height
8.8 m indoors, 7.5 m outdoors
Machine width
0.996 m
Platform capacity
250 kg
Platform height
6.8 m indoors, 5.5 m outdoors
  • OutdoorsBest suited
  • IndoorsWorks here too, where access allows

22ft tracked electric scissor lift, 996 mm wide (just under 1 m). 8.8 m working height indoors, 7.5 m outdoors. Rubber tracks for uneven ground, dirt and light mud, with self-levelling outriggers for set-up on a slope.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Price Beat Guarantee. Send us a valid written quote from another Australian hire company for the same or an equivalent machine and we will quote you 5% below its total. We compare the whole quote, including delivery, collection and any fees, not item by item. See the conditions

Long term rate: 22ft Tracked Scissor Lift rate group

Rate details and conditions

Tracked for uneven or unlevel ground, dirt and light mud at 22ft, on one clear long term rate with no insurance, environmental or hire levies added.

The machine shown

Working height
8.8 m
Machine width
0.996 m
  • No insurance levy
  • No environmental levy
  • No hire levy

Return fuel-powered equipment with the agreed fuel level. Refuelling and damage charges may apply under your hire agreement.

Any delivery and collection is quoted upfront.

This machine is also for sale: see the listing and ask about this unit

Specification sheetPDF, 269 KB, LGMG SC0610EL-2
Download

Overview

About the 22ft Tracked Electric Scissor Lift

The LGMG SC0610EL-2 is a 22ft tracked electric scissor lift. Indoors it’s rated to 8.8 m working height and 6.8 m platform height with two people. Outdoors it’s 7.5 m working height and 5.5 m platform height with one person. Platform capacity is 250 kg, with 120 kg on the extension deck. It runs on non-marking rubber tracks and sets itself level on self-levelling outriggers. 0.996 m wide, 2.281 m long and 2.192 m high stowed, 1,600 kg, with an onboard charger that runs from a 240V outlet. Figures are from the LGMG SC0610EL-2 specification sheet, page 2.

What is it for?

Work up to about 8.8 m indoors, or 7.5 m outside, on ground a wheeled scissor lift can’t handle: uneven or unlevel yards, dirt and light mud on building sites, sloping set-ups, and hard floors where the rubber tracks won’t mark. At 996 mm wide it gets through plenty of side gates to back yards. Typical jobs are eaves, gutters and fascias, facade work around houses, and work on sites that aren’t finished yet.

How it levels

The machine sets its outriggers down and levels itself before it lifts. It doesn’t drive with the outriggers down, so on a long run you move it, then set up again. Send us the slope or a photo and we’ll check it. If you need to keep driving while level, look at the Athena 870 BL EVO, which levels on its tracks. The two methods are compared in the tracked scissor lift hire guide.

Typical jobs for the SC0610EL-2

Examples of the work this machine is hired for. They’re examples, not records of completed jobs.

Eaves work, North Epping

A clear approach and a spot to set up the outriggers under the work. A scissor lift goes straight up, so it sets up right under the eaves.

Rear courtyard maintenance, Campsie

Measure the gate and side passage and send it through with a photo, and we’ll check the fit.

Rear courtyard lighting and eaves, Newtown

Pavers in the yard? Let us know and we’ll talk through protection and set-up.

Handy to send us

Don’t have all of it? Send what you’ve got and we’ll sort the rest. It’s also available with a plant trailer as a 22ft tracked scissor lift + trailer combo, and it’s for sale if you’d rather own one. Compare every tracked and self-levelling scissor lift, or get a quote. Call 0472 721 234.

3 Google reviews from customers who hired tracked & all terrain Read them

I don’t usually leave reviews, but the service provided by Kay and Shev was amazing. I hired a tracked 19ft scissor lift and the whole process was easy from start to finish. The scissor lift was in great condition, clean, well maintained and worked exactly as it should. I decided to go with pickup as I ws in the area and it went smooth and everything was ready to go when I arrived. I’ve hired equipment plenty of times before where the trailer ends upp being the annoying part, either old, rough or not set up properly, but that wasn’t the case here at all. The trailer provided was in great condition and made transporting the machine simple and safe. Highly recommend Equip Hire for quick and reliable access equipment hire.

sahel anwaryGoogle ReviewJun 2026via Google

Equip Hire replied: Thanks heaps, Sahel. Really appreciate the detailed review, especially the note about the trailer, that makes a big difference when picking up a tracked 19 ft scissor lift. Glad Kay and Shev had everything ready and the whole hire was smooth from start to finish. If you need scissor lift hire, tracked scissor lift hire, or access equipment hire around Penrith, Minchinbury, Parramatta or wider Sydney again, we will look after you.

Hired a scissor lift through the brother Kay! The dude was a top bloke, went above and beyond just to meet our needs! I’ll definitely be coming back here for any future hires 🫱🏽‍🫲🏾 …

Vavega “Venks” FomaiGoogle ReviewMay 2026via Google

Equip Hire replied: Thanks heaps, Vavega. Really appreciate the kind words, and stoked the scissor lift hire was a good fit for your job. Whenever you need access equipment hire in Sydney again, whether it is scissor lift hire Sydney, boom lift hire, or an Athena tracked scissor for rough ground, just give us a yell. 🤝 …

K was awesome to deal with. His service is second-to-none and I would highly recommend using their equipment. K was super very quick to respond to calls and was always available to guide me through any issues. Thanks again!

Harry AtuatikaGoogle ReviewMar 2026via Google

Equip Hire replied: Thanks, Harry. Glad the quick callbacks and walkthroughs helped and that everything felt easy on your end. If your next Sydney job needs access equipment, we have you covered with scissor lift hire Sydney, boom lift hire, and Athena tracked scissor lifts for uneven ground. Appreciate the recommendation.

Reviews left on Google by Equip Hire customers. All tracked & all terrain reviews.

Download spec sheet (PDF)

LGMG SC0610EL-2 tracked scissor lift working on site

Where it works

Best-fit jobs and sites

  • Uneven or unlevel ground, dirt and light mud, sloping set-ups on its self-levelling outriggers, hard floors (non-marking tracks), and access where a 1.15 m tracked lift won't fit: it's 996 mm wide.

Good to confirm: Indoors it's rated to 8.8 m working height with 2 people; outdoors it's 7.5 m with 1 person. It's 996 mm wide, so send us your gate or door measurement and we'll check the fit. It sets up on outriggers, and we'll help plan the set-up spots with you. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. All 17 figures are on file.

Manufacturer spec sheet

Reach

8.8 m indoors, 7.5 m outdoors
Working height
8.8 m indoors, 7.5 m outdoorsWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
6.8 m indoors, 5.5 m outdoorsThe platform floor at full height, about 2 m below working height.

Access

0.996 m
Machine width
0.996 mNeeds double doors or gate access.
Stowed height
2.192 mCheck door headers, ducts and awnings on the route in.
Length
2.281 mRoom to turn in corridors and lifts.

Surface

Tracked / self-levelling outriggers
Ground it suits
Tracked / self-levelling outriggersNon-marking rubber tracks: built for uneven or unlevel ground, dirt and light mud, and fine on hard floors and slab. Tracks spread the load but do not guarantee against sinking or ground failure: tell us the surface and we will check it.
Gradeability
30 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
YesStabilisers the machine sets down before it lifts, where fitted.
Levelling
Self-levelling outriggers: the machine sets its outriggers down and levels itself before it lifts. It does not drive with the outriggers down; move it, then set up again. Levelling limits are set by the manual, so send us the slope or a photo and we will check it.How this model is set level before it lifts, as recorded from its manual.

Load

250 kg
Platform capacity
250 kg
Deck extension
YesRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Electric
Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Confirm the charging supply on site with us before delivery.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.

Transport

1,600 kg
Weight
1,600 kg
Customer pickup
Approved on Eco Plant 2Subject to your tow vehicle rating and licence, checked at the yard.

Compliance

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.
Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
8.8 m indoors, 7.5 m outdoors
Platform height
6.8 m indoors, 5.5 m outdoors
Extension deck
Yes
Capacity2 specs
Platform capacity
250 kg
Maximum occupants
2
Dimensions3 specs
Overall length
2.281 m
Machine width
0.996 m
Stowed height
2.192 m
Performance4 specs
Gradeability
30 %
Terrain type
Tracked / self-levelling outriggers
Indoor use
Yes
Outdoor use
Yes
Power & drive4 specs
Power
Electric
Battery
Electric
Charging
Onboard (240V outlet)
Drive type
Tracked
Machine & transport5 specs
Manufacturer
LGMG
Model
SC0610EL-2
Machine weight
1,600 kg
Customer pickup
Approved, subject to towing checks
Delivery
Quoted by suburb & access

Also available to buy

22ft Tracked Electric Scissor Lift for Sale

  • Asset referenceEH-2201

Buying used? What to check before you buy · Handover and delivery checklist

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Hire guide

Before and during the hire

Delivery, access, charging and daily checks for this machine. Tap a topic.

Dimensions at a glance

Length 2.28 m Stowed 2.19 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 6.8 m Working 8.8 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
1 m: needs double doors or gate access
Stowed height
2.19 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, approved subject to towing checks

This machine may be collected on a suitable plant trailer. Your trailer’s rated capacity (ATM), the tow vehicle’s rating, tie-downs and ramps all need to check out, bring the numbers and we will confirm before you leave the yard.

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates. Delivered from our Western Sydney depot across Sydney, including Central Coast, Parramatta, Lidcombe and Homebush and Sydney CBD.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Charging this machine

Battery electric: charge it at the end of every shift.

Swipe

Charging supply

Onboard (240V outlet). Have that supply live near where the machine parks overnight.

Charge it every night

A full charge from flat takes most of a night. How long a charge lasts on the day depends on battery condition, drive distance, lift cycles and load, so there is no fixed runtime: tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Plan the track path

Tracks are gentle on surfaces, but confirm pavers, pit lids and irrigation lines on the route can take the machine’s weight.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer documents for this model. Swipe or scroll sideways to see them all.

Manufacturer specification sheetPDF, 269 KB, LGMG SC0610EL-2
Download

Questions about hiring this machine

How high can the LGMG SC0610EL-2 reach?

Working height is 8.8 m and the platform floor rises to 6.8 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 0.996 m wide and 2.28 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 2.19 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 250 kg, with up to 2 people. People, tools and materials all count. The extension deck has its own limit of 120 kg, which applies at the same time as the platform limit.

Some models allow fewer people outdoors than indoors; the decal on the platform and the manual give the limit for each condition.

Can it reach over an obstacle?

A scissor lift goes straight up; the extension deck, where fitted, slides out over the front only. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What ground can it work on?

It is built for uneven or unlevel ground, dirt and light mud, and its non-marking tracks work on hard floors and slab too. Tracks do not make weak ground safe: soft, wet or recently filled ground, pits, trenches, edges and pavers over sand still need a ground-bearing check, and boards may be needed to avoid marking lawn or pavers. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

It is rated for outdoor use. The maximum wind speed for this model is confirmed from its manual before outdoor work. Electric power means no exhaust indoors, but electric power alone does not make a machine rated for outdoor use.

Can it work on a slope?

Gradeability of 30% is the steepest slope it can drive up while stowed. That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

This model has a levelling system: it can level its chassis on uneven ground within limits set in its manual. The ground must still be firm, and the levelling limits checked against your site.

How much setup space does it need?

It has outriggers, so allow for their footprint when set up. Allow a firm area for the delivery truck to unload close to where it will work.

How is it charged?

It runs on batteries (Electric). Charger: Onboard (240V outlet). You need a standard power outlet near where it is parked, and it should be charged at the end of each day. Ask us if your site power is limited or temporary.

How long does a charge last?

Runtime depends on how far it drives, how often it lifts, the load, temperature and battery age, so there is no fixed number of hours. Plan to charge it every night, and tell us if your work involves a lot of driving between work areas.

How heavy is it, and can my floor take it?

It weighs about 1,600 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

It can be collected from our Western Sydney depot on the approved Eco Plant 2, subject to the towing checks at collection, or delivered. Delivery is quoted with the machine for your suburb, site access and hire dates.

To tow it yourself, the 22ft Tracked Scissor Lift + Eco Plant 2 Trailer Combo: LGMG SC0610EL-2 package pairs it with an approved trailer.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $150 + GST ($165 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a scissor lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Green Zoomlion ZS0612C 19ft tracked scissor lift, three-quarter view Hire
  • 7.8 mWorking height
  • 1.15 mOverall width
  • 230 kgPlatform
  • ElectricPower

Scissor Lifts

19ft Tracked Electric Scissor Lift

Zoomlion ZS0612C

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $140/day + GST

19ft tracked electric scissor lift, 7.8m working height, 230kg capacity.

Almac Athena 870 BL EVO 19ft tracked bi-levelling scissor lift, three-quarter view Hire
  • 7.9 mWorking height
  • 1.30 mOverall width
  • 250 kgPlatform
  • Bi-energyPower

Scissor Lifts

19ft Tracked Hybrid Scissor Lift Almac Athena 870 BL EVO

Almac Athena 870 BL EVO

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $140/day + GST

19ft tracked hybrid (bi-energy) scissor lift with 7.9 m working height and 250 kg on a full 1.50 by 1.20 m basket. Levels on its tracks for uneven or sloping ground.

Almac Athena 850BL 19ft tracked bi-levelling scissor lift, three-quarter view Hire
  • 7.9 mWorking height
  • 1.30 mOverall width
  • 250 kgPlatform
  • Bi-energyPower

Scissor Lifts

19ft Tracked Hybrid Scissor Lift Almac Athena 850BL

Almac Athena 850BL

Indoors and outdoorsBest outdoors

Short-term hireQuoted for your dates

Long term hire*From $140/day + GST

19ft tracked hybrid (bi-energy) self-levelling scissor lift, 7.9m working height, 250kg, bi-levelling crawler undercarriage for slopes and rough ground.

How the SC0610EL-2 compares

Of the similar machines we hire, the SC0610EL-2 is the narrowest here at 1 m, so it suits the tightest doorways, the lightest at 1,600 kg, kinder on floors and trailers, the biggest platform load at 250 kg.

MachineWorking heightWidthWeightPlatform loadPower
22ft Tracked Scissor Lift SC0610EL-2 (this one) 8.8 m1 m 1,600 kg250 kg Electric
Athena 870 BL EVO 19ft Tracked Scissor Athena 870 BL EVO 7.9 m1.3 m 2,460 kg250 kg Bi-energy (15 amp mains electric or onboard diesel)
Athena 850BL 19ft Tracked Scissor Athena 850BL 7.9 m1.3 m 2,520 kg250 kg Bi-energy (15 amp mains electric or onboard diesel)
19ft Tracked Scissor Lift ZS0612C 7.8 m1.15 m 1,820 kg230 kg Electric

Get a quote for the 22ft Tracked Electric Scissor Lift

8.8 m indoors, 7.5 m outdoors working height, 0.996 m wide, 250 kg capacity. Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote