0472 721 234 Get a Quote

Equipment for sale

22ft Tracked Electric Scissor Lift for Sale

LGMG SC0610EL-2

22ft tracked electric scissor lift with rubber crawlers for soft ground and low ground pressure — around 8.8m working height.

Price on application

This machine is also available to hire, see hire details and delivery

Working height
8.8 m
Platform height
6.8 m
Platform capacity
240 kg
Deck extension
Yes
Specification sheetDownload Specification sheet

Overview

About the LGMG SC0610EL-2 Tracked Scissor Lift

Download spec sheet (PDF)

LGMG SC0610EL-2 Tracked Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Soft ground and lawns, landscaping and grounds, tight or sensitive-surface access needing low ground pressure.

Good to confirm: Tracked repositioning is slower; confirm exact dimensions and capacity from the spec sheet. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 6 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
8.8 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
6.8 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
Confirm
Stowed height
Confirm
Length
Confirm

Surface

Ground it suits
Tracked // low ground pressureRubber tracks spread the weight: lawns, pavers and soft or uneven ground within the machine's rated slope.
Gradeability
Confirm
Levelling
NoHow the machine is set level before it lifts.

Load

Platform capacity
240 kg
Deck extension
YesRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Charges from a 10 A wall socket.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.

Transport

Weight
Confirm
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

At a glance

Specification summary

Machine specification summary
SpecificationVerified valueSite suitability
Working height8.8 mMeasure the task height, including anything overhead, before booking.
Platform capacity240 kgRating includes operators, tools and materials. Do not exceed the plate rating.
Indoor useYesConsidered for indoor work, subject to floor loading and access clearances.
PowerElectricBattery electric drive produces no engine exhaust at the point of use. Charging access is required.
TerrainTracked // low ground pressureTracks spread machine load over a larger area. A site assessment is still required.

Figures are taken from the manufacturer specification sheet for this model. Site suitability notes are general guidance: the site, the surface, the operator and the task decide what is safe on the day.

Specifications

Full specifications

Grouped for quick scanning, a row appears once its figure is verified for this machine. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
8.8 m
Platform height
6.8 m
Extension deck
Yes
Capacity1 spec
Platform capacity
240 kg
Performance3 specs
Terrain type
Tracked // low ground pressure
Indoor use
Yes
Outdoor use
Yes
Power & drive4 specs
Power source
Electric
Battery
Electric
Charging
Onboard (240V outlet)
Drive type
Tracked
Machine & transport4 specs
Manufacturer
LGMG
Model
SC0610EL-2
Customer pickup
Delivery only
Delivery
Quoted by suburb & access

Also available to buy

22ft Tracked Electric Scissor Lift for Sale

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Buying

Inspection, transport and handover

What happens between your enquiry and the machine arriving.

Swipe

Inspection

The machine is at our Berkshire Park depot in Western Sydney and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.

Transport

We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

What comes with it

Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.

Want to see it first?

Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.

Power

Charging this machine

Battery electric, charged from a normal household power point.

Swipe

Maintenance-free batteries

Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.

Charges from a normal 10 amp wall plug

The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire. Onboard (240V outlet)

Overnight charge, full day’s work

About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Plan the track path

Tracks are gentle on surfaces, but confirm pavers, pit lids and irrigation lines on the route can take the machine’s weight.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Enquire about the LGMG SC0610EL-2 Tracked Scissor Lift

Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.

Looking to hire this machine instead? See hire details and delivery

CallGet Hire Quote