0472 721 234 Get a Quote

Tracked / self-levelling on tracks, drives while level

19ft Tracked Hybrid Scissor Lift Hire Almac Athena 850BL in Sydney

Hire from

$140 + GST per day ($154 inc GST)

Minimum hire term 3 months. Shorter hires: request a quote for your dates. Rate details

Almac Athena 850BL

Working height
7.9 m
Machine width
1.3 m
Platform capacity
250 kg
Platform height
5.9 m

19ft tracked hybrid (bi-energy) self-levelling scissor lift, 7.9m working height, 250kg, bi-levelling crawler undercarriage for slopes and rough ground. Runs plugged in to 15 amp mains power, or on its separate Kubota diesel engine where there is no power on site.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Long-term hire

19ft Tracked Scissor Lift rate group

From $140/day on 3 months+ hire

Minimum hire 3 months or longer

Tracked for uneven or unlevel ground, dirt and light mud, on one clear long-term rate with no insurance, environmental or hire levies added.

The machine shown

Working height
7.9 m
Machine width
1.3 m
  • No insurance levy
  • No environmental levy
  • No hire levy

Any delivery and collection is quoted upfront.

Specification sheetPDF, 971 KB, Almac Athena 850BL
Download Specification sheet

Overview

About the Athena 850BL Tracked Scissor Lift

The Almac Athena 850BL is a 19ft tracked hybrid (bi-energy) scissor lift. It runs plugged in to 15 amp mains power, or on its separate Kubota diesel engine where there is no power on site. It levels itself on its tracks, with no outriggers, and can keep driving while levelled. 7.9 m working height, 5.9 m platform height, 250 kg (2 people) on a 1.50 x 0.78 m platform, with Direction-Control and Easy-Drive systems.

Typical jobs for the Athena 850BL

Examples of the work this machine is hired for. They are examples, not records of completed jobs. Levelling does not replace a suitable surface: we check the ground, gradient and access against Almac’s limits before we confirm it.

Gutter repairs on a sloping block, Beecroft

A firm but uneven approach with paving, garden edges and changes in level. The lift levels on its tracks and keeps driving along the gutter line. Check the access width and the slope at each working position.

Gutter maintenance, North Ryde

Ground that rises and falls along the house. Send photos of the route and the gradient so the levelling limits can be checked first.

External painting, Toukley

Painting or gutter work on a Central Coast property with level changes. Confirm the access route and the surface, including buried services or structures under the working positions.

Acreage eaves and gutters, Angus

Check gate clearance, gradients and ground support along the whole route, not only beside the house.

Property maintenance, Moss Vale

Gutters, external lights or eaves the platform can reach straight up to. If a roof edge or structure is in the way, the job needs a boom lift.

Compare the two levelling methods in the tracked scissor lift hire guide, or send your dates, working height and a photo of the ground for a quote. Call 0472 721 234.

Customers who hired tracked & all terrain

I don’t usually leave reviews, but the service provided by Kay and Shev was amazing. I hired a tracked 19ft scissor lift and the whole process was easy from start to finish. The scissor lift was in great condition, clean, well maintained and worked exactly as it should. I decided to go with pickup as I ws in the area and it went smooth and everything was ready to go when I arrived. I’ve hired equipment plenty of times before where the trailer ends upp being the annoying part, either old, rough or not set up properly, but that wasn’t the case here at all. The trailer provided was in great condition and made transporting the machine simple and safe. Highly recommend Equip Hire for quick and reliable access equipment hire.

sahel anwaryGoogle ReviewJun 2026via Google

Equip Hire replied: Thanks heaps, Sahel. Really appreciate the detailed review, especially the note about the trailer, that makes a big difference when picking up a tracked 19 ft scissor lift. Glad Kay and Shev had everything ready and the whole hire was smooth from start to finish. If you need scissor lift hire, tracked scissor lift hire, or access equipment hire around Penrith, Minchinbury, Parramatta or wider Sydney again, we will look after you.

Hired a scissor lift through the brother Kay! The dude was a top bloke, went above and beyond just to meet our needs! I’ll definitely be coming back here for any future hires 🫱🏽‍🫲🏾 …

Vavega “Venks” FomaiGoogle ReviewMay 2026via Google

Equip Hire replied: Thanks heaps, Vavega. Really appreciate the kind words, and stoked the scissor lift hire was a good fit for your job. Whenever you need access equipment hire in Sydney again, whether it is scissor lift hire Sydney, boom lift hire, or an Athena tracked scissor for rough ground, just give us a yell. 🤝 …

K was awesome to deal with. His service is second-to-none and I would highly recommend using their equipment. K was super very quick to respond to calls and was always available to guide me through any issues. Thanks again!

Harry AtuatikaGoogle ReviewMar 2026via Google

Equip Hire replied: Thanks, Harry. Glad the quick callbacks and walkthroughs helped and that everything felt easy on your end. If your next Sydney job needs access equipment, we have you covered with scissor lift hire Sydney, boom lift hire, and Athena tracked scissor lifts for uneven ground. Appreciate the recommendation.

Reviews left on Google by Equip Hire customers. All tracked & all terrain reviews.

Download spec sheet (PDF)

Athena 850BL Tracked Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Sloping, uneven or unlevel ground, dirt and light mud, work along a slope where the machine levels on its tracks and keeps driving, and hard floors (non-marking tracks).

Good to confirm: Tracked repositioning is slower than wheeled. Electric running is tethered and needs a 15 amp supply on a lead, because there is no on-board battery: if a 15 amp outlet is not within reach of the work area the machine runs on its separate Kubota diesel engine instead, so confirm the power before an indoor or enclosed job. Confirm the surface rating before tracking over finished ground. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. 14 of 16 figures are on file; 2 are still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
7.9 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
5.9 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
1.3 mNeeds double doors or gate access.
Stowed height
2.28 mCheck door headers, ducts and awnings on the route in.
Length
1.94 mRoom to turn in corridors and lifts.

Surface

Ground it suits
Tracked / self-levelling on tracks, drives while levelNon-marking rubber tracks: built for uneven or unlevel ground, dirt and light mud, and fine on hard floors and slab. Tracks spread the load but do not guarantee against sinking or ground failure: tell us the surface and we will check it.
Gradeability
Confirm
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.
Levelling
Automatic bi-levelling tracks: the machine levels itself on its tracks, with no outriggers, and can keep driving while levelled. Up to 16 deg front, 20 deg rear and 15 deg lateral. Gradeability 25 deg, side slope 21 deg (Almac sheet). Width 1.30 m on narrow tracks, 1.50 m on wide; 1.98 m high with railings folded.How this model is set level before it lifts, as recorded from its manual.

Load

Platform capacity
250 kg

Environment

Power
Bi-energy (15 amp mains electric or onboard diesel)Two modes: electric for quiet, no-exhaust work, and an engine for outdoor, ventilated sites only. Confirm the supply its electric mode needs with us before delivery.
Indoor / outdoor
Indoor (limited) and outdoorIndoor use is limited: confirm floor loading, headroom and access width before taking it inside. Wind ratings still apply outdoors.

Transport

Weight
2,520 kgDecides the trailer it may travel on and the floor loads on site.
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is quoted with the hire.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply when running on the engine.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform2 specs
Working height
7.9 m
Platform height
5.9 m
Capacity1 spec
Platform capacity
250 kg
Dimensions3 specs
Overall length
1.94 m
Machine width
1.3 m
Stowed height
2.28 m
Performance3 specs
Terrain type
Tracked / self-levelling on tracks, drives while level
Indoor use
Limited
Outdoor use
Yes
Power & drive2 specs
Power
Bi-energy (15 amp mains electric or onboard diesel)
Drive type
Tracked
Machine & transport5 specs
Manufacturer
Almac
Model
Athena 850BL
Machine weight
2,520 kg
Customer pickup
Not yet decided, delivery quoted with the hire
Delivery
Quoted by suburb & access

Dimensions at a glance

Length 1.94 m Stowed 2.28 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 5.9 m Working 7.9 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
1.3 m: needs double doors or gate access
Stowed height
2.28 m: check door headers, ducts and awnings on the route in
Weight
2,520 kg through low-pressure tracks. Confirm suspended-floor ratings before it goes on

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine (it weighs about 2,520 kg). Delivery is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply when running on the engine.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Power

Power and running

Hybrid (bi-energy): an electric mode and a diesel engine.

Swipe

Charging or mains supply

The supply this model needs for its electric mode is confirmed with your quote. Tell us what power is available on site and whether it is temporary site power.

Ventilation

Never run the ENGINE in an enclosed or poorly ventilated space. On electric there is no exhaust; whether electric mode suits an indoor job is confirmed with you.

Running it on site

  • Use electric mode for quiet, no-exhaust work; the engine is for outdoor, ventilated ground.
  • Have the charging or mains supply live where the machine works or parks overnight.
  • Plan refuelling for the engine before the tank runs down.
  • Check site rules for noise and exhaust before early starts on the engine.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Plan the track path

Tracks are gentle on surfaces, but confirm pavers, pit lids and irrigation lines on the route can take the machine’s weight.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer specification sheetPDF, 971 KB, Almac Athena 850BL
Download Manufacturer specification sheet

Questions about hiring this machine

How high can the Almac Athena 850BL reach?

Working height is 7.9 m and the platform floor rises to 5.9 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 1.3 m wide and 1.94 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 2.28 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 250 kg. People, tools and materials all count.

Can it reach over an obstacle?

A scissor lift goes straight up; the extension deck, where fitted, slides out over the front only. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What ground can it work on?

It is built for uneven or unlevel ground, dirt and light mud, and its non-marking tracks work on hard floors and slab too. Tracks do not make weak ground safe: soft, wet or recently filled ground, pits, trenches, edges and pavers over sand still need a ground-bearing check, and boards may be needed to avoid marking lawn or pavers. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

It is rated for outdoor use. The maximum wind speed for this model is confirmed from its manual before outdoor work.

Can it work on a slope?

That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

This model has a levelling system: it can level its chassis on uneven ground within limits set in its manual. The ground must still be firm, and the levelling limits checked against your site.

How much setup space does it need?

It does not use outriggers. Allow a firm area for the delivery truck to unload close to where it will work.

How is it powered?

It has two power modes: electric and a diesel engine. On electric there is no exhaust and it runs quietly; the engine is for outdoor, ventilated work only. Which mode suits your job, and the power supply it needs on site, is confirmed with the quote.

How heavy is it, and can my floor take it?

It weighs about 2,520 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

Delivery is from our Berkshire Park depot. Delivery is quoted with the machine for your suburb, site access and hire dates. Customer pickup has not been approved for this machine, so plan on delivery.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $140 + GST ($154 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a scissor lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Get a quote for the Athena 850BL Tracked Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote