Athena 850BL Tracked Scissor Lift
Manufacturer Almac · Model Athena 850BL · Class Scissor Lifts
Reach
| Working height | 7.9 m |
| Platform height | 5.9 m |
Dimensions & weight
| Overall width | 1.3 m |
| Overall length | 1.94 m |
| Stowed height | 2.28 m |
| Machine weight | 2,520 kg |
Performance
| Indoor use | Limited |
| Outdoor use | Yes |
Power & drive
| Power | Bi-energy (15 amp mains electric or onboard diesel) |
| Fuel | Bi-energy. Kubota Z482 diesel engine, or mains electric through a 15 amp supply for indoor and enclosed work. There is no on-board battery: electric running is tethered, so a 15 amp outlet has to be within reach of the work area on a lead. Without one the machine runs on the diesel engine. |
Tyres
| Drive | Tracked |
| Terrain | Tracked / self-levelling on tracks, drives while level |
| Tracks | Rubber tracks |
Identity
| Manufacturer | Almac |
| Model | Athena 850BL |
Figures are the manufacturer’s published specifications for this model. A specification the manufacturer does not publish is left out of this sheet rather than estimated.
Manufacturer specification sheet: 19ft-bi-levelling-tracked-scissor-lift-athena-850bl-specifications.pdf
Before use on siteOperation requires appropriate training and, where the machine or the task requires it, the relevant licence or certification. Work to the manufacturer’s operation manual for this machine and to current SafeWork NSW guidance.
Prepared from Equip Hire’s fleet record on 27 October 2026; specifications last verified 19 July 2026. Current version: https://equiphire.com.au/equipment-hire/scissor-lifts/19ft-tracked-hybrid-scissor-lift-hire-sydney-almac-athena-850bl/. This document states machine specifications only. It is not a risk assessment, a SWMS, a method statement, or safety advice of any kind, and it does not replace the manufacturer’s operation manual, the machine’s compliance plate, or a site-specific assessment of access, ground conditions, overhead and underground services and the work to be done. Figures are the manufacturer’s published specifications for the model and are given for convenience: Equip Hire does not warrant that they are complete, current, or applicable to the individual machine supplied, and any dimension the work is planned around should be confirmed against the machine itself on delivery. Preparing, checking and applying the SWMS, and the safety of the work, remain the responsibility of the person conducting the business or undertaking at the workplace. To the extent permitted by law, Equip Hire accepts no liability for any loss, damage or injury arising from reliance on this document.
