Brian James 3717-35-2-12 Plant Trailer

Name: Plant Trailer Hire
Brand: Brian James

Brian James 3717-35-2-12

Hire Enquiry Call 0472 721 234

Specification sheetDownload Specification sheet

Overview

About the Brian James 3717-35-2-12 Plant Trailer

Download spec sheet (PDF)

Specifications

Full specifications

Grouped for quick scanning — a row appears once its figure is verified for this machine. The manufacturer spec sheet always takes precedence.

Machine & transport4 specs

Manufacturer: Brian James
Model: 3717-35-2-12
Customer pickup: Delivery only
Delivery: Quoted by suburb & access

Delivery, access and running

Delivery is quoted by suburb, site access and transport requirements. Tell us the tightest access width on site if the machine must pass through gates, doorways or between structures.

Hire period: Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together; see our hire terms for responsibilities during the hire.

Pre-start checks, every day

Every Equip Hire machine is function-tested before delivery, and every operator still checks the machine before each shift. This is the baseline we use; the machine's own logbook and check sheet govern.

Walk around

Tyres / tracks, wheels and structure: damage, cracks, leaks
Scissor stack / boom, pins and hoses: no visible damage or hydraulic leaks
Decals, capacity plate and rails in place; gates close properly
Work area: overhead power lines, holes, slopes, other traffic

Power on

Fuel level, engine oil and coolant
Ground and platform controls both operate correctly
Emergency stop and horn work from both stations

Function test

Raise, lower and drive at low height before working
Emergency lowering: know where it is and that it works
Tilt / overload alarms not showing faults

Any fault: tag it out and call us on 0472 721 234. Do not operate a machine with a known fault. Based on manufacturer pre-start requirements and SafeWork NSW guidance.

Before it arrives

Measure the route, not the door. Every gate, corridor and lift on the way to the work area: handles, hinges, bollards and stored materials all eat clearance.
Confirm the floor. Ground-bearing slab is fine; suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.
Clear the work zone. Overhead services, sprinkler heads and light fittings at working height; exclusion for people below.
Delivery space. Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

Mistakes we see weekly

Booking on ceiling height instead of the actual task height. Measure to the work, then add nothing "just in case".
Quoting the nominal door size instead of the clear opening. An 820 mm door leaf are not 820 mm once the door stop is counted.
Assuming the machine can cross "a bit of lawn". Wheeled machines rut turf and bog in soft ground; say so and we'll send tracks.
Leaving induction and permit requirements to delivery morning. Shopping centres and managed sites need paperwork before the truck arrives.