0472 721 234 Get a Quote

Heights, Reach and Dimensions

Boom Lift Hire Around Awnings: Measurements to Send With Your Quote

Awnings, verandas and setbacks decide which boom lift works. The five measurements and photos to send so the machine can actually reach.

Quick answer

Send the height of the work, the horizontal distance from where the machine can stand to the work, the height and depth of the awning or obstacle, the size and surface of the standing area, and the access route. With those, we check the manufacturer working envelope for each model.

Why the obstacle decides the machine

A boom’s headline working height and outreach are reached at different boom positions. Reaching over an awning needs height first, then outreach beyond it. Whether a model can do both depends on its working envelope chart, so we need your measurements to check.

The five measurements

  1. Height of the work, from the ground where the machine stands.
  2. Horizontal distance from the nearest point the machine can stand to the work face.
  3. Obstacle height, to the top of the awning, veranda or fence.
  4. Obstacle depth, how far it projects from the building.
  5. Standing area, its width and length, the surface and any slope.

Photos from the street and from the side show what the numbers cannot, such as overhead power lines, trees and kerbs.

Up-and-over

An articulating, or knuckle, boom can rise above the obstacle and then reach down and out. A straight telescopic boom reaches further but cannot bend over an edge. The knuckle boom guide explains when each suits.

Our boom fleet

Boom lift reach on the current fleet
MachineWorking heightHorizontal outreachWidthPlatform capacityPower
Zoomlion ZA10RJE Electric Articulating Boom Lift11.6 m6.9 m1.19 m230 kgElectric
Genie Z-34/22 Articulating Boom Lift12.6 m6.8 m1.85 m227 kgDiesel
LGMG AR11J Articulating Boom Lift12.8 m6.8 m1.85 m270 kgDiesel
Genie Z-40/23N RJ Articulating Boom Lift14.3 m6.9 m1.5 m227 kgElectric
Skyjack SJ45 AJ+ Articulating Boom Lift15.5 m6.9 m2.29 m300 kgDiesel
Skyjack SJ46 AJ Articulating Boom Lift15.9 m7.5 m2.29 m227 kgDiesel
Skyjack SJ51 AJ Articulating Boom Lift17.6 m9 m2.29 m227 kgDiesel
Sinoboom AB18J Articulating Boom Lift20.3 m12.2 m2.28 m250 kgDiesel

Figures are read from the manufacturer specification held on each machine record. Fleet data last updated 30 July 2026.

These are maximum figures. They are not available together at every point, which is why we check the chart against your measurements.

Ground and access

Footpaths, driveways and garden beds may need ground protection or a permit. Check whether the machine has to stand on council land, and allow for traffic or pedestrian control where needed. Booms with a boom length of 11 m or more need an operator with a WP licence in NSW; see the licence guide.

Send it with your quote

Browse boom lift hire or knuckle booms, or compare with a scissor lift in boom lift vs scissor lift.

Include the five measurements, photos, dates and suburb.

Send your measurements for a boom quote

Sources and references

  1. Machine figures read at page load from Equip Hire machine records (manufacturer specification sheets

Manufacturer figures are read from the spec sheet or operator manual held for that machine. Regulatory statements are general information about NSW and Australian requirements, not legal advice for your site.

Found something incorrect?

Tell us the section and what is wrong. A person reads every report; nothing you write here is published.

Plan it with our tools

Working Height CalculatorCheck the height you actually need

Ready to sort the equipment?

Tell us the job, the working height, the access and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote