0472 721 234 Get a Quote

Rough terrain / 4WD

Skyjack SJ51 AJ Articulating Boom Lift

Skyjack SJ51 AJ

51ft diesel articulating boom lift, 17.55m working height, 9.03m outreach, 227kg, the long-reach knuckle boom, 4WD with 45% gradeability.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Working height
17.55 m
Machine width
2.29 m
Platform capacity
227 kg
Transport
Pickup: confirmation required
Specification sheetPDF, 787 KB, Skyjack SJ51 AJ
Download Specification sheet

Overview

About the Skyjack SJ51 AJ Articulating Boom Lift

The Skyjack SJ51 AJ is the long-reach diesel articulating boom in the fleet: 17.55m working height, 15.55m platform height, 9.03m horizontal reach (9.68m working reach) and 7.45m up-and-over height. Axle-based 4WD with 0.20m axle oscillation and 45% gradeability on 12×16.5 grip-lug foam-filled tyres. The 1.83 x 0.76m platform rotates 170 degrees; the 1.52m jib works +70 to -75 degrees; turret rotation is 355 degrees non-continuous. Stage V Deutz D2.2L diesel, 18.5kW (24.8hp). 7,300kg.

Download spec sheet (PDF)

Skyjack SJ51 AJ Articulating Boom Lift working on site

Where it works

Best-fit jobs and sites

  • High external access where outreach matters more than height, facade and cladding work, plant and steelwork over obstructions.

Good to confirm: Diesel engine — outdoor use only. 7,300kg; check ground bearing and access. Local floor load with rated load 917 kPa. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 4 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
17.55 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
15.55 mThe platform floor at full height, about 2 m below working height.
Horizontal outreach
ConfirmA boom is chosen on outreach at height. Confirm with the envelope chart.

Access

Machine width
2.29 mVehicle-width access needed.
Stowed height
Confirm
Length
Confirm
Turning radius
5.15 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
Gradeability
45 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

Platform capacity
227 kg

Environment

Power
DieselEngine exhaust and noise: outdoor, ventilated sites only.
Indoor / outdoor
OutdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Foam-filledCheck floor finish before it goes on.

Transport

Weight
7,300 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Licence
Boom-type EWP. A WP-class high-risk work licence is required in NSW where the boom length is 11m or more; harness with lanyard mandatory in the basket.NSW rule is the boom length of 11 metres or more, not the working height. Below it, EWPA Yellow Card (boom class). Harness on a short lanyard in the basket always.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform2 specs
Working height
17.55 m
Platform height
15.55 m
Capacity1 spec
Platform capacity
227 kg
Dimensions2 specs
Overall width
2.29 m
Turning radius
5.15 m
Performance4 specs
Gradeability
45 %
Terrain type
Rough terrain / 4WD
Indoor use
No
Outdoor use
Yes
Power & drive3 specs
Power source
Diesel
Drive type
4WD
Tyre type
Foam-filled
Machine & transport5 specs
Manufacturer
Skyjack
Model
SJ51 AJ
Machine weight
7,300 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Dimensions at a glance

Platform 15.55 m Working 17.55 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
2.29 m: large machine, so plan vehicle-width access

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Boom-type EWP. A WP-class high-risk work licence is required in NSW where the boom length is 11m or more; harness with lanyard mandatory in the basket.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/5
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Licence: the boom-length rule

In NSW a WP-class high-risk work licence is required to operate a boom-type platform with a boom length of 11 metres or more. The threshold is the boom length, not the working height or the platform height. Below it, the operator must still be trained (EWPA Yellow Card, boom class). A harness on a short lanyard is required in the basket at any boom length.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Walk the ground

Compacted and trafficable beats “looks firm”. Mark soft spots, trenches and services before the machine tracks over them.

3

Plan the set-up and the swing

Firm, level ground where the machine stands, room for the tail swing and the counterweight, and the basket path drawn from that spot to the work: up, over and back in.

4

Power lines and wind

Keep the boom outside the exclusion zone for overhead lines and know the machine’s wind rating before you book an exposed job.

5

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Sizing on working height alone

A boom is chosen on outreach at the height you need. The envelope chart, not the headline figure, tells you whether the basket gets there.

Skipping the harness

A harness on a short lanyard is required in a boom basket every time it moves, at any boom length.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Get a quote for the Skyjack SJ51 AJ Articulating Boom Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote