Quick answer
For warehouse lighting, choose an electric scissor lift by the height of the fittings (working height is roughly platform height plus 2 metres), the floor finish (epoxy and polished slabs need non-marking tyres), the narrowest aisle between racks and overnight charging from a 240 V outlet. A 19 ft electric scissor lift with a 7.8 m working height suits fittings up to about that height.
Warehouse lighting is one of the most common jobs our 19 ft electric scissor lifts go out on. Customers fitting lights in warehouses with epoxy floors tell us the same two things matter most: non-marking tyres that leave the floor clean, and a machine that reaches the height and feels stable the whole time. This page sets out how to choose a scissor lift for warehouse lighting, so the job is right on the first call.
Our scissor lift size guide compares actual machine heights, widths and weights for planning overhead work.
Why a scissor lift suits warehouse lighting
Lighting runs in straight lines at one height. The installer needs both hands free, room on the deck for fittings and cable, and a way to move along the run without climbing down. An electric scissor lift drives along the row while lowered, then rises at each fitting. A ladder at every light is the setup it replaces.
What decides the machine
- The height of the fittings. Measure from the floor to the underside of the light or the bracket. Working height is roughly platform height plus 2 metres, so a 7.8 m working height suits fittings up to about that height. The working height chart lists every machine, and working height vs platform height explains the difference. Higher roofs need a 32ft or 40ft electric scissor lift.
- The floor. Epoxy, polished concrete and sealed slabs need non-marking tyres and a machine that keeps its weight off one small spot. Our electric scissor lifts run on non-marking solid tyres. If the floor is new or you are unsure what it can carry, read machine weight and floor loading first.
- The racking. Measure the aisle width between racks, and check nothing overhangs the aisle at platform height. Our narrowest scissor lifts start at 0.76 m wide.
- Charging. The machine is charged overnight from a standard 240 V outlet. How long one charge lasts depends on the battery’s condition, how far the lift drives along the run, how often it goes up and down and the load on the deck, so it is not a fixed number of hours. Tell us the length of the run and your working hours when you book and we will say whether one charge should cover the shift or a top-up at lunch is worth planning. See charging an electric scissor lift.
For most warehouse lighting jobs we send a 19 ft electric scissor lift such as our JLG ES1932: 7.8 m working height, 230 kg platform capacity, 0.81 m wide, $95 a day or $295 a week + GST.
Delivery or pickup
We deliver and collect, quoted with the hire. Some 19 ft electric scissor lifts can also be collected from our Western Sydney depot on an approved machine and trailer package if your vehicle and licence suit; ask us first.
Planning a lighting job?
Send the height of the fittings, the floor finish, the narrowest aisle and your dates. Ask for a quote or call 0472 721 234.