0472 721 234 Get a Quote

Power, Charging and Work Environment

Signage Install from a 19 ft Electric Scissor Lift: A Customer Job

Quick answer

A 19 ft electric scissor lift (about 7.8 m working height) suits signs fixed up to about that height, where the machine can stand on firm, level ground right under the sign. If an awning, garden bed or step is in the way, you need a boom lift. Outdoors, the wind limit on the compliance plate applies, and plan an exclusion zone for the public.

Moey hired a 19 ft electric scissor lift from us for a signage install, and left a Google review: “Excellent communication and service with fast delivery and response time”. This page uses that job to set out how to choose a scissor lift for putting up signs, and what to check before it arrives so the install goes in on the day.

JLG ES1932 electric scissor lift raised to the signage above a warehouse roller door at night
The signage job: our JLG ES1932 raised to the sign above the roller door.

Why a scissor lift suits signage

A sign has to be held level, lined up and fixed with both hands, often by two people at once. A scissor lift gives a railed deck with room for the installers, the fixings and the tools, and it rises straight up under the sign. On a long fascia it drives along while lowered and rises again at the next fixing point.

What to check before it arrives

  • The height of the top of the sign. Measure from the ground to the highest fixing point. Working height is roughly platform height plus 2 metres, so a 19 ft class machine with a 7.8 m working height suits signs fixed up to about that height. The working height chart lists every machine.
  • The ground under the machine. An electric slab scissor lift needs a firm, level surface such as a concrete apron or a slab. Kerbs, garden beds, soft ground and steep driveways need a different machine. Our ground conditions guide covers what to look for.
  • The weight on the deck. Add up the people, the sign and the tools. The JLG ES1932 platform carries 230 kg. A large sign may need lifting in parts or a different machine.
  • Reaching over something. A scissor lift goes straight up. If an awning, a garden bed or a step sits between where the machine can park and the sign, you need a boom lift. Boom lift hire around awnings lists the measurements to send.
  • Wind. Outside, the wind limit on the machine’s compliance plate applies. See wind limits and weather planning.
  • People and vehicles. Shopfronts and car parks are busy. Plan an exclusion zone under the work area, and do the job outside trading hours if you can.
Installers fixing a sign above a warehouse roller door from a JLG ES1932 scissor lift at night
Fixing the sign after hours, with the machine parked on the concrete apron.

Delivery or pickup

We deliver and collect, quoted with the hire. Some 19 ft electric scissor lifts can also be collected from our Western Sydney depot on an approved machine and trailer package if your vehicle and licence suit; ask us first.

Planning a signage job?

Send the height of the top of the sign, what the ground is where the machine will stand, anything between the machine and the wall, and your dates. Ask for a quote or call 0472 721 234.

Found something incorrect?

Tell us the section and what is wrong. A person reads every report; nothing you write here is published.

Plan it with our tools

Working Height CalculatorCheck the height you actually need Battery Runtime EstimatorWill a charge last your shift?

Ready to sort the equipment?

Tell us the job, the working height, the access and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote