0472 721 234 Get a Quote

Power, Charging and Work Environment

A 19 ft Electric Scissor Lift for a Large Indoor Feature Wall: Alpine Spas

Quick answer

For indoor feature walls and fit-out work, an electric scissor lift gives two people a railed deck square to the wall with both hands free. Choose it by the height of the top of the wall (working height is about platform height plus 2 m), the weight of people, tools and materials, a non-marking floor, and the narrowest door on the way in.

Alpine Spas hired one of our 19 ft electric scissor lifts, a JLG ES1932, for work on a large printed feature wall indoors. The photo shows the job: two people side by side on the deck, both hands on the wall, with the machine parked tight against it on a smooth floor. This page uses that job to set out how to choose a scissor lift for feature walls, wall graphics and other high fit-out work inside a building.

Two installers working on a large printed feature wall from the deck of a JLG ES1932 electric scissor lift
Alpine Spas: our JLG ES1932 at the feature wall.

Why a scissor lift suits wall work

A feature wall is a wide, flat face at one height band. The people doing it need both hands free, room to stand side by side, and a way to move along the wall without climbing down. A scissor lift gives a railed deck that sits square to the wall, drives along it while lowered and rises again at the next section. A ladder or a mobile tower is the setup it replaces.

What decides the machine

  • The height of the top of the wall. Measure from the floor to the highest point anyone has to reach. Working height is roughly platform height plus 2 metres. The ES1932 has a 7.8 m working height. The working height chart lists every machine.
  • Who and what goes on the deck. Add up the people, tools and materials. The ES1932 platform carries 230 kg. Large panels or rolls are often lifted in stages rather than all at once.
  • The floor. Showrooms, retail and office floors need non-marking tyres. Our electric scissor lifts run on non-marking solid tyres. If the floor is new or you are unsure what it can carry, read machine weight and floor loading.
  • Getting it inside. Measure the narrowest door and the route to the wall. The ES1932 is 0.81 m wide, and our narrowest scissor lifts start at 0.76 m. Choosing a scissor lift for indoor work covers doors, lifts and corridors.
  • The space in front of the wall. Clear stock, displays and furniture so the machine can park square to the wall and drive along it.

The JLG ES1932 page has the full specifications.

Planning a fit-out or wall job?

Send the height of the top of the wall, the floor finish, the narrowest door on the way in and your dates. Ask for a quote or call 0472 721 234.

Found something incorrect?

Tell us the section and what is wrong. A person reads every report; nothing you write here is published.

Plan it with our tools

Doorway & Access CheckerWill it fit through the gate? Battery Runtime EstimatorWill a charge last your shift?

Ready to sort the equipment?

Tell us the job, the working height, the access and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote