0472 721 234 Get a Quote

Job and Trade Guides

Roller Door Installs from a Scissor Lift: A Job with AA Garage Door Repair and Servicing

Quick answer

For a roller or garage door install, choose the scissor lift by four things: the height to the head of the opening (working height is roughly platform height plus 2 metres), the floor in front of the opening (concrete suits an electric scissor lift), the narrowest point on the way in, and the combined weight of the installer, the drum or curtain and the tools against the platform capacity.

AA Garage Door Repair and Servicing Pty Ltd hired a scissor lift from us in February 2026 for a roller door install, and left a Google review with three photos from the job. In their words, the hire was “easy to deal with on time”. This page uses that job to set out what decides the machine for garage and roller door work, so the next installer can get it right on the first call.

AA Garage Door Repair and Servicing installing a roller door from an Equip Hire scissor lift
Photo: AA Garage Door Repair and Servicing, from their Google review of Equip Hire.

Why a scissor lift suits roller door work

A roller door install is work along a straight line at one height: the brackets, the drum and the motor sit across the head of the opening, and the installer needs both hands free and room on the deck for the parts and tools. A scissor lift gives a wide, stable deck that sits square to the wall, and it can be driven along the opening while lowered. A ladder at each end of a heavy drum is the setup it replaces.

What decides the size

  • The height of the head of the opening. Measure from the floor to the underside of the lintel or the bracket position. Working height is roughly platform height plus 2 metres, and the working height chart lists every machine.
  • The floor. Garages, warehouses and loading docks are usually concrete, which suits an electric scissor lift. Gravel or an unsealed driveway in front of the opening is a different machine; tell us.
  • The way in. If the opening is the only way in and the old door is still in place, measure the clear width and height with the door up. Our narrow scissor lifts start at 0.76 m wide.
  • The weight on the deck. Add up the installer, the drum or curtain section and the tools, and check it against the platform capacity on the machine page.

Pickup or delivery

Smaller scissor lifts can be collected on one of our approved machine and trailer packages if your vehicle and licence suit; ask us first. Otherwise we deliver and collect, quoted with the hire.

Planning a door install?

Send the height to the head of the opening, the floor surface, the narrowest point on the way in and your dates. Ask for a quote or call 0472 721 234.

Sources and references

  1. AA Garage Door Repair and Servicing Pty Ltd, Google review of Equip Hire with job photos (February 2026), published with permission
  2. Equip Hire machinery library, working height and platform capacity per machine

Manufacturer figures are read from the spec sheet or operator manual held for that machine. Regulatory statements are general information about NSW and Australian requirements, not legal advice for your site.

Found something incorrect?

Tell us the section and what is wrong. A person reads every report; nothing you write here is published.

Plan it with our tools

Working Height CalculatorCheck the height you actually need Doorway & Access CheckerWill it fit through the gate?

Ready to sort the equipment?

Tell us the job, the working height, the access and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote