0472 721 234 Get a Quote

Works indoors and outdoors

26ft Electric Scissor Lift Hire in Sydney

Long term hire* from

$50 + GST per day ($55 inc GST)

*Long term rate, on hires of 3 months or more. Rate details

Short-term hire too. A day, a week or a month: get a quote for your dates.

Skyjack SJ4726

Working height
9.82 m
Machine width
1.19 m
Platform capacity
454 kg
Platform height
7.82 m
  • IndoorsBest suited
  • OutdoorsWorks here too, on firm level ground

26ft electric scissor lift, 9.82m working height, 454kg and three people, the high-capacity electric deck for indoor work.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Price Beat Guarantee. Send us a valid written quote from another Australian hire company for the same or an equivalent machine and we will quote you 5% below its total. We compare the whole quote, including delivery, collection and any fees, not item by item. See the conditions

Long term rate: 26ft Electric Scissor Lift rate group

Rate details and conditions

Warehouse and mezzanine height on a quiet electric machine, with no insurance, environmental or hire levies added.

The machine shown

Working height
9.8 m
Machine width
1.19 m
  • No insurance levy
  • No environmental levy
  • No hire levy

Return fuel-powered equipment with the agreed fuel level. Refuelling and damage charges may apply under your hire agreement.

Any delivery and collection is quoted upfront.

Specification sheetPDF, 289 KB, Skyjack SJ4726
Download

Overview

About the 26ft Electric Scissor Lift

The Skyjack SJ4726 is a 26ft electric scissor lift built for carrying people and materials together: 9.82m working height, 7.82m platform height and 454kg overall (318kg distributed on the main platform plus 136kg on the 1.22m roll-out extension deck). It is rated for three people. The 1.07 x 2.11m platform sits on a 1.19m wide chassis; 2,135kg, 25% gradeability when driving stowed, 0.71m inside turning radius, non-marking 16x5x12 tyres. Figures from the Skyjack SJ4726 specification sheet.

Download spec sheet (PDF)

Skyjack SJ4726 electric scissor lift features and controls

Features

What sets it apart

  • 454kg total capacity, 318kg platform plus 136kg extension deck
  • 1.22m roll-out extension deck
  • Drivable at full height with proportional controls
  • 1.19m wide, 0.71m inside turning radius
  • Pothole protection and overload sensing
  • Solid non-marking tyres, 24V DC
  • Tilt sensor 3.5 x 1.5 degrees with drive and lift cut-out
Skyjack SJ4726 electric scissor lift working on site

Where it works

Best-fit jobs and sites

  • Indoor work that needs materials on the deck, high racking and services, fit-outs where three trades share the platform.

Good to confirm: Hard-surface machine: firm level ground, confirm floor loading. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. All 18 figures are on file.

Manufacturer spec sheet

Reach

9.82 m
Working height
9.82 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
7.82 mThe platform floor at full height, about 2 m below working height.

Access

1.19 m
Machine width
1.19 mNeeds double doors or gate access.
Stowed height
2.29 mCheck door headers, ducts and awnings on the route in.
Length
2.32 mRoom to turn in corridors and lifts.
Turning radius
2.64 mTighter is easier in aisles and around racking.

Surface

Indoor / hard standing
Ground it suits
Indoor / hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
25 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

454 kg
Platform capacity
454 kg
Deck extension
1.22m roll-out, 136kgRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Electric
Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Confirm the charging supply on site with us before delivery.
Indoor / outdoor
Indoor and outdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking: safe on finished floors.

Transport

2,135 kg
Weight
2,135 kg
Customer pickup
Ask usDelivered on our truck, quoted with the hire. Want to collect it yourself? Ask and we will check the trailer and tow vehicle with you.

Compliance

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.
Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
9.82 m
Platform height
7.82 m
Extension deck
1.22m roll-out, 136kg
Capacity2 specs
Platform capacity
454 kg
Maximum occupants
3
Dimensions4 specs
Overall length
2.32 m
Machine width
1.19 m
Stowed height
2.29 m
Turning radius
2.64 m
Performance4 specs
Gradeability
25 %
Terrain type
Indoor / hard standing
Indoor use
Yes
Outdoor use
Yes, 1 person outdoors to 12.5 m/s wind (up to 3 indoors), on firm, level hard standing. Best indoors.
Power & drive4 specs
Power
Electric
Battery
24V DC
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
Skyjack
Model
SJ4726
Machine weight
2,135 kg
Customer pickup
Delivered on our truck, ask us about collecting
Delivery
Quoted by suburb & access

Hire guide

Before and during the hire

Delivery, access, charging and daily checks for this machine. Tap a topic.

Dimensions at a glance

Length 2.32 m Stowed 2.29 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 7.82 m Working 9.82 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
1.19 m: needs double doors or gate access
Stowed height
2.29 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

We deliver this machine on our truck, quoted together with the hire. Keen to collect it yourself? Ask the team and we will check whether a trailer combination suits it.

Comparable machines

Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.

  • Genie 26ft electric scissor lift
  • JLG 26ft electric scissor lift
  • Haulotte 26ft electric scissor lift
  • Sinoboom 26ft electric scissor lift
  • Dingli 26ft electric scissor lift

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates. Delivered from our Western Sydney depot across Sydney, including Central Coast, Parramatta, Lidcombe and Homebush and Sydney CBD.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Charging this machine

Battery electric: charge it at the end of every shift.

Swipe

Batteries

24V DC

Charging supply

The charger supply for this machine is confirmed with your quote. Tell us what power is available where it will park overnight (and whether it is temporary site power), and we check it matches before delivery.

Charge it every night

A full charge from flat takes most of a night. How long a charge lasts on the day depends on battery condition, drive distance, lift cycles and load, so there is no fixed runtime: tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab usually suits it. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer documents for this model. Swipe or scroll sideways to see them all.

Manufacturer specification sheetPDF, 289 KB, Skyjack SJ4726
Download

Questions about hiring this machine

How high can the Skyjack SJ4726 reach?

Working height is 9.8 m and the platform floor rises to 7.8 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 1.19 m wide and 2.32 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 2.29 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 454 kg, with up to 3 people. People, tools and materials all count. The extension deck has its own limit of 136 kg, which applies at the same time as the platform limit.

Some models allow fewer people outdoors than indoors; the decal on the platform and the manual give the limit for each condition.

Can it reach over an obstacle?

A scissor lift goes straight up; the extension deck, where fitted, slides out over the front only. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What surfaces can it be used on?

It is built for firm, level, hard surfaces: concrete floors, sealed paving and slabs. It is not for grass, gravel, mud or uneven ground. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

It is rated for outdoor use. The maximum wind speed for this model is confirmed from its manual before outdoor work. Electric power means no exhaust indoors, but electric power alone does not make a machine rated for outdoor use.

Can it work on a slope?

Gradeability of 25% is the steepest slope it can drive up while stowed. That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

How is it charged?

It runs on batteries (24V DC). You need a standard power outlet near where it is parked, and it should be charged at the end of each day. Ask us if your site power is limited or temporary.

How long does a charge last?

Runtime depends on how far it drives, how often it lifts, the load, temperature and battery age, so there is no fixed number of hours. Plan to charge it every night, and tell us if your work involves a lot of driving between work areas.

How heavy is it, and can my floor take it?

It weighs about 2,135 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

Delivery is from our Western Sydney depot. Delivery is quoted with the machine for your suburb, site access and hire dates. We deliver it on our truck. Keen to collect it yourself? Ask us and we will check the trailer and tow vehicle with you.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $50 + GST ($55 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a scissor lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Genie GS-3232 32ft narrow electric scissor lift in the stowed position Hire
  • 11.78 mWorking height
  • 0.82 mOverall width
  • 227 kgPlatform
  • ElectricPower

Scissor Lifts

32ft Narrow Electric Scissor Lift

Genie GS-3232

Indoors and outdoorsBest indoors

Short-term hireQuoted for your dates

Long term hire*From $90/day + GST

32ft narrow electric scissor lift, 11.78m working height, 227kg, 0.82m wide, the tallest narrow machine we list.

Haulotte Compact 12 32ft electric scissor lift raised to working height Hire
  • 11.98 mWorking height
  • 1.2 mOverall width
  • 300 kgPlatform
  • ElectricPower

Scissor Lifts

32ft Electric Scissor Lift Haulotte Compact 12

Haulotte Compact 12

Indoors and outdoorsBest indoors

Short-term hireQuoted for your dates

Long term hire*From $70/day + GST

32ft electric scissor lift, 11.98m working height, 300kg, 1.2m wide, tall electric reach with a 3.23m extended deck.

Genie GS-3246 32ft electric scissor lift in the stowed position Hire
  • 11.75 mWorking height
  • 1.17 mOverall width
  • 318 kgPlatform
  • ElectricPower

Scissor Lifts

32ft Electric Scissor Lift Genie GS-3246

Genie GS-3246

Indoors and outdoorsBest indoors

Short-term hireQuoted for your dates

Long term hire*From $70/day + GST

32ft electric scissor lift, 11.75m working height, 318kg, the workhorse electric deck for high indoor access.

How the SJ4726 compares

Of the similar machines we hire, the SJ4726 is the biggest platform load at 454 kg.

MachineWorking heightWidthWeightPlatform loadPower
SJ4726 26ft Electric Scissor SJ4726 (this one) 9.82 m1.19 m 2,135 kg454 kg Electric
Compact 10N 26ft Narrow Scissor Compact 10N 9.8 m0.81 m 2,160 kg250 kg Electric
SJIII 3226 26ft Narrow Scissor SJIII 3226 9.92 m0.81 m 1,876 kg227 kg Electric
26ft Narrow Scissor Lift ZS0808AC 10 m0.81 m 2,090 kg230 kg Electric

Get a quote for the 26ft Electric Scissor Lift

9.82 m working height, 1.19 m wide, 454 kg capacity. Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote