0472 721 234 Get a Quote

Equipment for sale

19ft Electric Scissor Lift for Sale LGMG S0607E II

LGMG S0607E II

19ft LGMG electric scissor lift, 7.8m working height, 230kg capacity, 0.79m wide with maintenance-free battery — compact indoor access.

Price on application

This machine is also available to hire, see hire details and delivery

Working height
7.8 m
Overall width
0.79 m
Platform capacity
230 kg
Transport
Pickup: confirmation required
Specification sheetDownload Specification sheet

Overview

About the LGMG S0607E II Electric Scissor Lift

Download spec sheet (PDF)

LGMG S0607E II Electric Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Indoor fit-outs and maintenance, electrical and HVAC, retail and warehouse work on finished floors.

Good to confirm: Solid tyres, low clearance — firm, level surfaces only. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 3 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
7.8 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
5.8 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
0.79 mFits a standard single doorway (about 0.82 m clear). Measure your narrowest opening.
Stowed height
Confirm
Length
Confirm
Turning radius
1.8 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Indoor // hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
25 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Levelling
NoHow the machine is set level before it lifts.

Load

Platform capacity
230 kg
Deck extension
0.9m, 120kgRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Charges from a 10 A wall socket.
Indoor / outdoor
IndoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking: safe on finished floors.

Transport

Weight
1,610 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
7.8 m
Platform height
5.8 m
Extension deck
0.9m, 120kg
Capacity1 spec
Platform capacity
230 kg
Dimensions2 specs
Overall width
0.79 m
Turning radius
1.8 m
Performance4 specs
Gradeability
25 %
Terrain type
Indoor // hard standing
Indoor use
Yes
Outdoor use
Limited
Power & drive5 specs
Power source
Electric
Battery
24V 225Ah (Li option 24V 160Ah)
Charging
Onboard (240V outlet)
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
LGMG
Model
S0607E II
Machine weight
1,610 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Dimensions at a glance

Platform 5.8 m Working 7.8 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
0.79 m: fits a standard single doorway (~0.82 m clear); measure your narrowest opening

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Also available to buy

19ft Electric Scissor Lift for Sale LGMG S0607E II

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Buying

Inspection, transport and handover

What happens between your enquiry and the machine arriving.

Swipe

Inspection

The machine is at our Berkshire Park depot in Western Sydney and you are welcome to inspect it, or have your own technician inspect it, before you commit. Call to arrange a time.

Transport

We sell Australia wide and can arrange transport to your state, or you are welcome to arrange your own carrier and collect from the depot.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

What comes with it

Where we hold them, the machine is handed over with its specification sheet, operation manual and current plant registration. Ask us what exists for this unit before you buy.

Want to see it first?

Tell us where you are and what you need it for. We will confirm the condition, the hours and what transport to your state would involve.

Power

Charging this machine

Battery electric, charged from a normal household power point.

Swipe

Batteries

24V 225Ah (Li option 24V 160Ah)

Maintenance-free batteries

Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.

Charges from a normal 10 amp wall plug

The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire. Onboard (240V outlet)

Overnight charge, full day’s work

About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab is fine. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Maintenance manualDownload Maintenance manual
Pre-start checklistDownload Pre-start checklist
Plant registrationDownload Plant registration

You might also consider

Enquire about the LGMG S0607E II Electric Scissor Lift

Tell us where you are and what you need it for. An Equip Hire equipment expert will confirm the condition, the hours and what transport to your state would involve.

Looking to hire this machine instead? See hire details and delivery

CallGet Hire Quote