0472 721 234 Get a Quote

Indoor // hard standing

19ft Electric Scissor Lift Hire LGMG S0607E II in Sydney

Daily hire

$95 + GST per day ($104.50 inc GST)

Longer hire $40 + GST per day

LGMG S0607E II

Working height
7.8 m
Machine width
0.79 m
Platform capacity
230 kg
Platform height
5.8 m

19ft LGMG electric scissor lift, 7.8m working height, 230kg capacity, 0.79m wide with maintenance-free battery, compact indoor access.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Long-term hire

19ft Electric Scissor Lift rate group

From $40/day on 3 months+ hire

Minimum hire 3 months or longer

A straightforward long-term hire rate, with no insurance, environmental or hire levies added.

The machine shown

Working height
7.8 m
Machine width
0.79 m
  • No insurance levy
  • No environmental levy
  • No hire levy

Any delivery and collection is quoted upfront.

This machine is also for sale, see condition, hours and price

Specification sheetPDF, 254 KB, LGMG S0607E II
Download Specification sheet

Overview

About the LGMG S0607E II Electric Scissor Lift

Typical jobs for the LGMG S0607E II

Examples of the work this 19ft narrow electric scissor lift is hired for around Sydney. They are examples, not records of completed jobs. We check every site before we confirm the machine.

Office lighting replacement, Macquarie Park

Ceiling lights replaced during an office refurbishment, working through an occupied floor. Check door clearances, floor protection over carpet, where it can charge, and the route through work areas to the job.

Shop lighting upgrade, Campsie

Ceiling work in a small commercial tenancy above a clear floor. Check the shopfront opening, aisle space and where the truck can unload out the front.

Need to tow it yourself? It is also available as the S0607E II and Eco Plant 2 trailer combo for approved customers.

Planning a job like this? Send your dates, working height and a photo of the access and we will quote the hire, delivery and collection. Or call 0472 721 234.

Download spec sheet (PDF)

LGMG S0607E II Electric Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Indoor fit-outs and maintenance, electrical and HVAC, retail and warehouse work on finished floors.

Good to confirm: Solid tyres, low clearance — firm, level surfaces only. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. 17 of 18 figures are on file; one is still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
7.8 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
5.8 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
0.79 mOnly a few centimetres narrower than a typical single door opening (about 0.82 m clear), so it must be measured. Many openings are less once the frame and hardware are counted. Measure the narrowest clear opening on the route, with room either side.
Stowed height
1.81 mCheck door headers, ducts and awnings on the route in.
Length
1.83 mRoom to turn in corridors and lifts.
Turning radius
1.8 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Indoor // hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
25 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

Platform capacity
230 kg
Deck extension
0.9m, 120kgRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Confirm the charging supply on site with us before delivery.
Indoor / outdoor
IndoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking tyres: made not to mark finished floors. Tell us the floor finish and we will check it.

Transport

Weight
1,610 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is quoted with the hire.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
7.8 m
Platform height
5.8 m
Extension deck
0.9m, 120kg
Capacity1 spec
Platform capacity
230 kg
Dimensions4 specs
Overall length
1.83 m
Machine width
0.79 m
Stowed height
1.81 m
Turning radius
1.8 m
Performance4 specs
Gradeability
25 %
Terrain type
Indoor // hard standing
Indoor use
Yes
Outdoor use
Limited
Power & drive5 specs
Power
Electric
Battery
24V 225Ah (Li option 24V 160Ah)
Charging
Onboard (240V outlet)
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
LGMG
Model
S0607E II
Machine weight
1,610 kg
Customer pickup
Not yet decided, delivery quoted with the hire
Delivery
Quoted by suburb & access

Dimensions at a glance

Length 1.83 m Stowed 1.81 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 5.8 m Working 7.8 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
0.79 m: only a few centimetres narrower than a typical single door opening (about 0.82 m clear); measure your narrowest clear opening, frame and hardware included
Stowed height
1.81 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Also available to buy

19ft Electric Scissor Lift for Sale LGMG S0607E II

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Power

Charging this machine

Battery electric: charge it at the end of every shift.

Swipe

Batteries

24V 225Ah (Li option 24V 160Ah)

Charging supply

Onboard (240V outlet). Have that supply live near where the machine parks overnight.

Charge it every night

A full charge from flat takes most of a night. How long a charge lasts on the day depends on battery condition, drive distance, lift cycles and load, so there is no fixed runtime: tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab usually suits it. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer specification sheetPDF, 254 KB, LGMG S0607E II
Download Manufacturer specification sheet
Operation manualPDF, 3 MB, LGMG S0607E II
Download Operation manual
Maintenance manualPDF, 1 MB, LGMG S0607E II
Download Maintenance manual
Pre-start checklistPDF, 284 KB, LGMG S0607E II
Download Pre-start checklist
Plant registrationPDF, 251 KB, LGMG S0607E II
Download Plant registration
Risk assessmentPDF, 333 KB, LGMG S0607E II
Download Risk assessment

Questions about hiring this machine

How high can the LGMG S0607E II reach?

Working height is 7.8 m and the platform floor rises to 5.8 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 0.79 m wide and 1.83 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 1.81 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 230 kg. People, tools and materials all count. The extension deck has its own limit of 120 kg, which applies at the same time as the platform limit.

Can it reach over an obstacle?

A scissor lift goes straight up; the extension deck, where fitted, slides out over the front only. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What surfaces can it be used on?

It is built for firm, level, hard surfaces: concrete floors, sealed paving and slabs. It is not for grass, gravel, mud or uneven ground. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

Outdoor use is limited: it can work outside only within the conditions in its manual (firm level ground, reduced wind and occupancy where stated), so we confirm those for your site before outdoor work. Electric power means no exhaust indoors, but electric power alone does not make a machine rated for outdoor use.

Can it work on a slope?

Gradeability of 25% is the steepest slope it can drive up while stowed. That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

How is it charged?

It runs on batteries (24V 225Ah (Li option 24V 160Ah)). Charger: Onboard (240V outlet). You need a standard power outlet near where it is parked, and it should be charged at the end of each day. Ask us if your site power is limited or temporary.

How long does a charge last?

Runtime depends on how far it drives, how often it lifts, the load, temperature and battery age, so there is no fixed number of hours. Plan to charge it every night, and tell us if your work involves a lot of driving between work areas.

How heavy is it, and can my floor take it?

It weighs about 1,610 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

Delivery is from our Berkshire Park depot. Delivery is quoted with the machine for your suburb, site access and hire dates. Customer pickup has not been approved for this machine, so plan on delivery.

To tow it yourself, the 19ft Electric Scissor Lift + Eco Plant 2 Trailer Combo: LGMG S0607E II package pairs it with an approved trailer.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $95 + GST ($104.50 inc GST) per day
  • $40 + GST ($44 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a scissor lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Get a quote for the LGMG S0607E II Electric Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote