0472 721 234 Get a Quote

Choosing and Comparing Equipment

46ft Electric Scissor Lift Guide: High-Bay Access and Floor Planning

Assess a 46ft electric scissor lift for high-bay work, with floor, route, charging and platform checks for the Sinoboom 1414E Plus.

Quick answer: A 46ft electric scissor lift is a specialist option for higher vertical access on a suitable surface. Equip Hire lists the Sinoboom 1414E Plus in this class, with a working height around 15.8m. It is worth assessing for high-bay maintenance and installation where an electric machine and a vertical approach fit the site.

At this size, the building route, floor and overhead layout are central to the decision. Choosing a machine that reaches the ceiling is only the first part of planning a useful hire.

Start with the highest useful working position

Describe what the operator must do at height, not just the building’s overall height. A light fitting below a roof structure, a pipe running between beams and a suspended sign may need different platform positions.

Explain any obstruction below or beside the work. A scissor needs an appropriate base position for vertical access. If the operator must work beyond fixed machinery or a deep obstruction, compare a suitable boom’s reach envelope instead.

Indoor and outdoor heights are different

Sinoboom’s published specification for the 1414E Plus gives a maximum working height of 15.8m indoors and 10.5m outdoors. Confirm the supplied unit’s rating when asking for the quote. A 15m external task should not be booked from the indoor headline figure.

That distinction can change the shortlist completely. Where the external height is beyond the electric unit’s permitted range, compare an appropriately rated rough terrain scissor or another suitable access method.

Check the floor and travelling route

Obtain the machine information needed for the site’s floor assessment, including the relevant concentrated loads. A concrete floor or an industrial building does not establish that every part of the route is suitable.

Measure door openings, thresholds, ramps, turns and overhead restrictions. Include travel between work zones and the route out once the installation is complete. Changes made during a fit-out can leave a machine with a different collection route from the one it used on arrival.

Give the operator a practical work area

Consider how other trades, moving stock and vehicles interact with the machine. The standing area and route need to support the planned operation without requiring repeated unsafe compromises.

Check the platform arrangement against people, tools and permitted materials. Plan where items will be staged and how access to the work area will be controlled. A large working-height figure does not remove the need for ordinary platform and site checks.

Machines to hire

Shortlisted from the current fleet for this size. Rates are the published rates; the machine, delivery and dates are confirmed with your quote.

Sinoboom 1414E Plus 46ft electric scissor lift Hire
  • 15.8 mWorking height
  • 1.41 mOverall width
  • 350 kgPlatform
  • ElectricPower

Scissor Lifts

46ft Electric Scissor Lift

Sinoboom 1414E Plus (4655E Plus)

Indoors and outdoorsBest indoors

Long term hire*From $110/day + GST

Short-term hireQuoted for your dates

46ft electric scissor lift: 15.8m working height indoors (10.5m outdoors, 1 person), 350kg, the tall electric machine for high racking and hard-surface indoor work.

Why it is on this list: Sinoboom 1414E Plus, the listed 46ft electric model: 15.8m working height indoors with 2 people, 10.5m outdoors with 1 person. Compare its platform and route requirements with the high-level work planned.

Outdoors: 10.5m working height (8.5m platform) and 1 person outdoors, against 15.8m (13.8m platform) and 2 people indoors. Firm, level hard standing within the wind rating. Best indoors.

Power and project timing

An electric machine needs a charging arrangement that fits the site’s supply and work schedule. Identify the charging location and access to it, and confirm the supplied unit’s requirements. Avoid assuming that a machine can work indefinitely because a power point is available somewhere in the building.

For a shutdown or staged project, tell Equip Hire when each work area becomes available. The quote can then reflect the hire period, transport and the actual sequence rather than an optimistic estimate of tool time.

Common questions

Can a 46ft lift work over racking? Only where its actual platform position and permitted operation suit the task. Fixed obstructions may make a boom or mast alternative more appropriate.

Is an electric machine automatically suitable for an indoor floor? No. The floor, route, load and site requirements still need assessment.

Should I choose it instead of a 40ft machine? Compare the required working position with verified model heights. Extra height should solve a real requirement.

Found something incorrect?

Tell us the section and what is wrong. A person reads every report; nothing you write here is published.

Plan it with our tools

Working Height CalculatorCheck the height you actually need Doorway & Access CheckerWill it fit through the gate? Ground Pressure GuideWill the surface take the machine?

Ready to sort the equipment?

Tell us the job, the working height, the access and the suburb. We will quote the machine and delivery together.

*Long term, 3+ months. Rates exclude GST. Delivery and collection quoted. Any hire period welcome.

CallGet Hire Quote