0472 721 234 Get a Quote

Rough terrain / 4WD

Skyjack SJ8841 RT Rough Terrain Scissor Lift

Skyjack SJ8841 RT

41ft diesel rough-terrain scissor lift, 14.32m working height, 680kg and five people — a 3.40m platform for crew and materials.

Working height
14.32 m
Overall width
2.21 m
Platform capacity
680 kg
Transport
Pickup: confirmation required
Specification sheetDownload Specification sheet

Overview

About the Skyjack SJ8841 RT Rough Terrain Scissor Lift

The Skyjack SJ8841 RT is a high-capacity diesel rough-terrain scissor lift: 14.32m working height, 12.50m platform height, 680kg capacity and a personnel rating of five. The platform measures 1.70 x 3.40m inside, with a 1.22m roll-out extension deck (dual decks available). 30% gradeability, 4,935kg, 10×16.5 tyres, 110V AC outlet on the platform, 5.6km/h drive speed.

Download spec sheet (PDF)

Skyjack SJ8841 RT Rough Terrain Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Large external jobs where the whole crew and their materials go up together, cladding and facade work, industrial and civil sites.

Good to confirm: Diesel engine — outdoor use only. 2.21m wide, 3.53m long, 4,935kg — confirm access and ground bearing. Flotation tyres reduce capacity. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 3 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
14.32 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
12.50 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
2.21 mVehicle-width access needed.
Stowed height
Confirm
Length
Confirm
Turning radius
6.3 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
Gradeability
30 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Levelling
NoHow the machine is set level before it lifts.

Load

Platform capacity
680 kg
Deck extension
1.22m roll-out (dual decks available)Roll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
DieselEngine exhaust and noise: outdoor, ventilated sites only.
Indoor / outdoor
OutdoorAs rated by the manufacturer. Wind ratings still apply outdoors.

Transport

Weight
4,935 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
14.32 m
Platform height
12.50 m
Extension deck
1.22m roll-out (dual decks available)
Capacity1 spec
Platform capacity
680 kg
Dimensions2 specs
Overall width
2.21 m
Turning radius
6.3 m
Performance4 specs
Gradeability
30 %
Terrain type
Rough terrain / 4WD
Indoor use
No
Outdoor use
Yes
Power & drive2 specs
Power source
Diesel
Drive type
4WD
Machine & transport5 specs
Manufacturer
Skyjack
Model
SJ8841 RT
Machine weight
4,935 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Dimensions at a glance

Platform 12.5 m Working 14.32 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
2.21 m: large machine, so plan vehicle-width access

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Walk the ground

Compacted and trafficable beats “looks firm”. Mark soft spots, trenches and services before the machine tracks over them.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Treating a rough-terrain machine as indoor

The tyres mark floors and the engine cannot run enclosed.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Get a quote for the Skyjack SJ8841 RT Rough Terrain Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote