0472 721 234 Get a Quote

Indoor / hard standing

15ft Electric Scissor Lift Hire in Sydney

Hire from

$40 + GST per day ($44 inc GST)

Minimum hire term 3 months. Shorter hires: request a quote for your dates. Rate details

Sinoboom 0407E (1530SE)

Working height
6.5 m
Machine width
0.76 m
Platform capacity
240 kg
Platform height
4.5 m

15ft electric scissor lift, 6.5m working height, 240kg, 0.76m wide with non-marking tyres, compact indoor access through standard doors.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Long-term hire

15ft Narrow Electric Scissor Lift rate group

From $40/day on 3 months+ hire

Minimum hire 3 months or longer

Narrow enough for many single doorways and shopfitting aisles (measure the clear opening), on one clear long-term rate with no insurance, environmental or hire levies added.

The machine shown

Working height
6.5 m
Machine width
0.76 m
  • No insurance levy
  • No environmental levy
  • No hire levy

Any delivery and collection is quoted upfront.

Specification sheetPDF, 599 KB, Sinoboom 0407E (1530SE)
Download Specification sheet

Overview

About the Sinoboom 0407E Electric Scissor Lift

The Sinoboom 0407E (0407SE) is a compact 15ft electric scissor lift: 6.5m working height indoors (5.8m outdoors), 4.5m platform, 240kg platform plus 115kg on the 0.6m extension deck. At 0.76m wide it passes through standard doorways and fits in lifts. DC motor drive for longer runtime, maintenance-free battery, non-marking tyres, automatic pothole protection, drivable at full height.

Download spec sheet (PDF)

Sinoboom 0407E Electric Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Low-height indoor fit-outs and maintenance, retail and office work, access through doorways and into lifts.

Good to confirm: Non-marking tyres, low clearance — firm, level surfaces only. 2 persons indoor / 1 outdoor. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions about this job, answered from this machine's verified specifications. 15 of 17 figures are on file; 2 are still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
6.5 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
4.5 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
0.76 mNarrower than a typical single door opening (about 0.82 m clear). Many openings are less once the frame and hardware are counted. Measure the narrowest clear opening on the route, with room either side.
Stowed height
1.67 mCheck door headers, ducts and awnings on the route in.
Length
1.42 mRoom to turn in corridors and lifts.

Surface

Ground it suits
Indoor / hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
Confirm
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

Platform capacity
240 kg
Deck extension
0.6m, 115kgRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Confirm the charging supply on site with us before delivery.
Indoor / outdoor
IndoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking tyres: made not to mark finished floors. Tell us the floor finish and we will check it.

Transport

Weight
880 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is quoted with the hire.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
6.5 m
Platform height
4.5 m
Extension deck
0.6m, 115kg
Capacity1 spec
Platform capacity
240 kg
Dimensions3 specs
Overall length
1.42 m
Machine width
0.76 m
Stowed height
1.67 m
Performance3 specs
Terrain type
Indoor / hard standing
Indoor use
Yes
Outdoor use
Limited
Power & drive4 specs
Power
Electric
Battery
Maintenance-free (DC drive)
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
Sinoboom
Model
0407E (1530SE)
Machine weight
880 kg
Customer pickup
Not yet decided, delivery quoted with the hire
Delivery
Quoted by suburb & access

Dimensions at a glance

Length 1.42 m Stowed 1.67 m
Stowed size (rails down may differ, so check the spec sheet)
Platform 4.5 m Working 6.5 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
0.76 m: narrower than a typical single door opening (about 0.82 m clear); measure your narrowest clear opening, frame and hardware included
Stowed height
1.67 m: check door headers, ducts and awnings on the route in

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Power

Charging this machine

Battery electric: charge it at the end of every shift.

Swipe

Batteries

Maintenance-free (DC drive)

Maintenance-free batteries

Sealed and maintenance free: no topping up with water and no battery servicing to arrange during your hire.

Charging supply

The charger supply for this machine is confirmed with your quote. Tell us what power is available where it will park overnight (and whether it is temporary site power), and we check it matches before delivery.

Charge it every night

A full charge from flat takes most of a night. How long a charge lasts on the day depends on battery condition, drive distance, lift cycles and load, so there is no fixed runtime: tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab usually suits it. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book: a tracked machine may suit, after the ground is checked.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

Manufacturer specification sheetPDF, 599 KB, Sinoboom 0407E (1530SE)
Download Manufacturer specification sheet

Questions about hiring this machine

How high can the Sinoboom 0407E (1530SE) reach?

Working height is 6.5 m and the platform floor rises to 4.5 m. Working height is the platform height plus about 2 m for a person standing on the platform, which is how hire sizes are normally stated.

How wide is it, and will it fit through my doorway?

It is 0.76 m wide and 1.42 m long when stowed. We look for at least 50 mm of clearance beyond the machine width at each opening. Measure the narrowest point of the whole route, not just the final doorway: gates, door frames, corridors, lift cars and the turn in from a corridor, which needs more room than a straight approach.

What is its travel height?

Stowed (travel) height is 1.67 m. Check headroom along the route: door heads, roller doors, ducts, sprinklers and ramps.

How much weight can the platform carry?

Rated platform capacity is 240 kg. People, tools and materials all count. The extension deck has its own limit of 115 kg, which applies at the same time as the platform limit.

Can it reach over an obstacle?

A scissor lift goes straight up; the extension deck, where fitted, slides out over the front only. To work over an awning, a roof edge or plant, look at articulating boom lifts, which go up and out.

What surfaces can it be used on?

It is built for firm, level, hard surfaces: concrete floors, sealed paving and slabs. It is not for grass, gravel, mud or uneven ground. Check the floor or ground can carry its weight (see below).

Is it suitable indoors or outdoors?

Outdoor use is limited: it can work outside only within the conditions in its manual (firm level ground, reduced wind and occupancy where stated), so we confirm those for your site before outdoor work. Electric power means no exhaust indoors, but electric power alone does not make a machine rated for outdoor use.

Can it work on a slope?

That is not permission to raise the platform on a slope: elevated work needs ground within the manufacturer's tilt limit, and the tilt alarm stops elevation beyond it.

How is it charged?

It runs on batteries (Maintenance-free (DC drive)). You need a standard power outlet near where it is parked, and it should be charged at the end of each day. Ask us if your site power is limited or temporary.

How long does a charge last?

Runtime depends on how far it drives, how often it lifts, the load, temperature and battery age, so there is no fixed number of hours. Plan to charge it every night, and tell us if your work involves a lot of driving between work areas.

How heavy is it, and can my floor take it?

It weighs about 880 kg. Weight alone does not show whether a floor can take it: suspended slabs, mezzanines, pits, pavers and lift cars need their rating checked against the wheel or track loads in the manufacturer's data, by someone able to assess the structure.

Can it be delivered, or can I collect it?

Delivery is from our Berkshire Park depot. Delivery is quoted with the machine for your suburb, site access and hire dates. Customer pickup has not been approved for this machine, so plan on delivery.

For delivery, the truck needs a firm, clear area to unload close to the work, and someone on site to sign for the machine.

What does the hire rate cover?
  • $40 + GST ($44 inc GST) per day, for hires of 3 months or more

Transport is quoted separately for your suburb and site. A longer-term rate applies only when the hire runs for its minimum period; a shorter hire is quoted at the rate for its actual length.

Do I need a licence to operate it in NSW?

No high risk work licence is needed for a scissor lift in NSW. Operators must still be trained and competent for this type of machine and familiarised with this model before use, and many sites ask for an industry card such as the EWPA Yellow Card plus their own induction. SafeWork NSW licence guidance.

What do I need to get a quote?

The machine, your dates, the site suburb and anything that limits access: the narrowest opening, headroom, ground type and how high the work is. The team confirms availability for your dates and that the machine suits the site, then sends the quote with delivery. Nothing is booked until we confirm.

How do I extend the hire or arrange collection?

A hire can be extended. Call or email the team with your hire reference and the new finish date, and earlier is better because the machine may be committed to another job. Extra time is confirmed with you, and the rate for the longer period is confirmed with it: a change to the booking can mean the rate is revised, a minimum hire applies, or the correct rate for the actual hire period is used.

Hire charges run until the machine is properly off-hired with Equip Hire and is available for collection, clean, accessible and safe to collect. To off-hire you contact Equip Hire directly and get an off-hire number or confirmation back. Stopping work, leaving the machine on site, telling another contractor or assuming we know the job is finished does not end the hire. Charges stop at the confirmed off-hire, not on the day the truck happens to arrive, but they can continue if the machine is not accessible or ready when we come for it.

When would a different machine suit better?

You might also consider

Get a quote for the Sinoboom 0407E Electric Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote