Do You Need a Licence for a Scissor Lift in NSW?
Scissor lifts are not a high risk work licence class in NSW, but training is still required.
Read guide Updated 15 Oct 2026
Advice topic
Safety, Training and NSW Requirements
General NSW and Australian requirements for elevating work platform work: when a high risk work licence applies, what Yellow Card training covers, harness guidance, wind limits, powerlines, pre-start inspections and operator competency.
EWP Safety Guide for Australian Worksites
Designed for operators, supervisors, site managers and first-time hirers.
Read guide Updated 26 Oct 2026
EWP Rescue Planning and Emergency Procedures Explained
A practical rescue-planning guide matched to real machines and real worksites.
Read guide Updated 26 Oct 2026
Daily EWP Pre-start Inspection Checklist
Make the daily pre-start a practical safety process, not a tick-box form.
Read guide Updated 27 Oct 2026
Ground Conditions for Access Equipment: What Operators Must Check
Ground that looks fine from the surface can still be unsafe.
Read guide Updated 19 Oct 2026
Working at Heights Guide: Controls, Planning and Equipment
A regulator-aligned guide to planning safer work at height, not just choosing equipment.
Read guide Updated 23 Oct 2026
Wind Limits and Weather for EWPs: A Practical Site Guide
Weather is not just wind speed, it changes site support and visibility too.
Read guide Updated 4 Aug 2026
SWMS Explained for EWP Work on Construction Sites
A practical guide to avoiding useless copy-paste SWMS documents.
Read guide Updated 4 Aug 2026
EWP Licences in NSW: What You Need Before You Operate
A high risk work licence applies to boom-type platforms with a boom of 11 metres or more.
Read guide Updated 25 Oct 2026
Ready to Quote Your Job?
Tell us the working height, ground surface and suburb. We will match a machine and quote delivery with it.