Australian owned & operated
Read our Google reviewsDelivery quoted to your suburbTalk to someone who knows the fleetScissor · boom · tracked access hire
0472 721 234
0472 721 234 Get a Quote
Get Quote
  • LGMG H730, with the boom raised and extended, available for hire from Equip Hire in Sydney.
  • LGMG H730, with the boom raised and extended — view 2, available for hire from Equip Hire in Sydney.
  • LGMG H730, three quarter view, available for hire from Equip Hire in Sydney.
Hire Now

Rough terrain / 4WD

LGMG H730 Telehandler

LGMG H730

3 tonne telehandler lifting to 6.9m with 4m outreach — four-wheel drive, four-wheel steer and a Kubota diesel for loaded work on site.

Hire Enquiry Call 0472 721 234

This machine is also for sale, see condition, hours and price

Working height
6.9 m
Overall width
2.3 m
Transport
Pickup: confirmation required
Power
Diesel
Specification sheetDownload Specification sheet

Overview

About the LGMG H730 Telehandler

Specification sheet for your SWMS

Download spec sheet (PDF)

LGMG H730 Telehandler features and controls

Features

What sets it apart

  • 3,000kg maximum lift capacity
  • 6.9m maximum lift height with 4m outreach
  • Four-wheel drive and four-wheel steer, 4m turning radius
  • ±5 degree frame tilt to level the load on a slope
  • Kubota 54.6kW (73.2hp) diesel, 24.9km/h top speed
  • Multiple-disc oil-bath brakes on front and rear axles
  • 43kN maximum traction force, 45% gradeability unladen
  • Rough-terrain load chart from 3,000kg down to 950kg at reach
LGMG H730 Telehandler working on site

Where it works

Best-fit jobs and sites

  • Loading and unloading deliveries on site; placing bricks, frames and roof sheets at height; moving palletised material over unformed ground; general builder and civil site material handling.

Good to confirm: A telehandler lifts loads, not people — a work platform attachment and the matching licence are required before anyone is lifted. 2.3m wide and 6,900kg: confirm access and ground bearing. Diesel, so not for enclosed indoor use. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 5 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Lift height
6.9 mThe height the forks reach. The load chart sets what may be lifted there.
Forward reach
ConfirmCapacity falls as the boom extends; plan the furthest placement first.

Access

Machine width
2.3 mVehicle-width access needed.
Stowed height
Confirm
Length
Confirm
Turning radius
4 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Rough terrain / 4WDBuilt for unsealed, compacted and uneven ground within its gradeability. Not for finished floors.
Gradeability
45 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Levelling
NoHow the machine is set level before it lifts.

Load

Rated capacity
Confirm

Environment

Power
DieselEngine exhaust and noise: outdoor, ventilated sites only.
Indoor / outdoor
OutdoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
PneumaticCheck floor finish before it goes on.

Transport

Weight
6,900 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Telehandlers are load-shifting plant. A high-risk work licence is not required in NSW for a non-slewing telehandler under 3 tonne capacity, but the operator must be trained and assessed as competent (TLILIC0005 for non-slewing mobile crane over 3t applies where capacity exceeds 3 tonne). Lifting a person requires an approved work platform attachment and the matching licence.No high-risk licence for fork work under 3 t. A crane configuration or a work-platform attachment changes the answer; ask before booking.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform1 spec
Working height
6.9 m
Dimensions2 specs
Overall width
2.3 m
Turning radius
4 m
Performance4 specs
Gradeability
45 %
Terrain type
Rough terrain / 4WD
Indoor use
No
Outdoor use
Yes
Power & drive3 specs
Power source
Diesel
Drive type
4WD
Tyre type
Pneumatic
Machine & transport5 specs
Manufacturer
LGMG
Model
H730
Machine weight
6,900 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Dimensions at a glance

Working 6.9 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
2.3 m: large machine, so plan vehicle-width access

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Also available to buy

LGMG H730 Telehandler For Sale

Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.

Price Price on application Enquire About This Machine

Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.

All machines for sale

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Comparable machines

Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.

  • Dieci 3t telehandler
  • Merlo 3t telehandler
  • Magni 3t telehandler
  • JCB 3t telehandler
  • Manitou 3t telehandler

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Heaviest load and furthest placement

Tell us the heaviest load, how high and how far it has to go, and what the ground is like. We read the load chart for the attachment and confirm the machine before it is loaded.

Licence and competency

Telehandlers are load-shifting plant. A high-risk work licence is not required in NSW for a non-slewing telehandler under 3 tonne capacity, but the operator must be trained and assessed as competent (TLILIC0005 for non-slewing mobile crane over 3t applies where capacity exceeds 3 tonne). Lifting a person requires an approved work platform attachment and the matching licence.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Get a Delivery Quote Call 0472 721 234

Safety

Pre-start checks, every day

A telehandler is checked as a load-handling machine, not as a work platform. The load chart for the attachment fitted decides what it may lift.

Swipe

1

Walk around

0/6
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

A telehandler is judged on the load chart and the ground. Sort both before it arrives.

Swipe

1

Read the load chart first

Weight, height and reach together decide what this machine can place. Have the heaviest load and the furthest placement written down before it arrives.

2

Walk the ground

Compacted and trafficable, with the bearing capacity for a loaded machine. Mark trenches, pits and services, and keep the boom out of the exclusion zone for power lines.

3

Plan the set-up and exclusion zone

Room to level the frame where loads are placed, and a zone nobody walks through under a suspended or raised load.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about gates, height limits and steep access when you book.

5

Attachments

Forks as standard. If you need a different attachment, tell us at booking so the right load chart travels with the machine.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Planning on the headline capacity

The maximum rated load is at minimum height and reach. At full extension the chart figure is a fraction of it.

Travelling with the boom up

Boom retracted and low to travel. A raised boom on a slope or soft ground is how these machines tip.

Using it as a work platform

A telehandler lifts materials. Lifting people needs an approved work-platform attachment and the operator competency that goes with it.

Leaving inductions to delivery morning

Managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Get a quote for the LGMG H730 Telehandler

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

Get My Hire Quote Call 0472 721 234
CallGet Hire Quote