0472 721 234 Get a Quote

Indoor / hard standing

Skyjack SJ4726 Electric Scissor Lift

Skyjack SJ4726

26ft electric scissor lift, 9.82m working height, 454kg and three people — the high-capacity electric deck for indoor work.

Working height
9.82 m
Overall width
1.19 m
Platform capacity
454 kg
Transport
Pickup: confirmation required
Specification sheetDownload Specification sheet

Overview

About the Skyjack SJ4726 Electric Scissor Lift

The Skyjack SJ4726 is a 26ft electric scissor lift with the highest platform capacity of the electric machines in the fleet: 9.82m working height, 7.82m platform height and 454kg overall (318kg distributed on the main platform plus 136kg on the 1.22m roll-out extension deck). Three people can work from it at zero wind rating. The 1.07 x 2.11m platform sits on a 1.19m wide chassis; 2,135kg, 25% gradeability, 0.71m inside turning radius, non-marking 16x5x12 tyres.

Download spec sheet (PDF)

Skyjack SJ4726 Electric Scissor Lift features and controls

Features

What sets it apart

  • 454kg total capacity — 318kg platform plus 136kg extension deck
  • 1.22m roll-out extension deck
  • Drivable at full height with proportional controls
  • 1.19m wide, 0.71m inside turning radius
  • Pothole protection and overload sensing
  • Solid non-marking tyres, 24V DC
  • Tilt sensor 3.5 x 1.5 degrees with drive and lift cut-out
Skyjack SJ4726 Electric Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Indoor work that needs materials on the deck, high racking and services, fit-outs where three trades share the platform.

Good to confirm: Hard-surface machine — firm level ground, confirm floor loading. Capacity drops to one person in wind up to 12.5 m/s. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 3 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
9.82 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
7.82 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
1.19 mNeeds double doors or gate access.
Stowed height
Confirm
Length
Confirm
Turning radius
2.64 mTighter is easier in aisles and around racking.

Surface

Ground it suits
Indoor / hard standingFirm, level ground: slab, sealed yard or compacted hardstand.
Gradeability
25 %The steepest grade it may DRIVE on, stowed. Working on a slope is a separate, smaller limit in the manual.
Levelling
NoHow the machine is set level before it lifts.

Load

Platform capacity
454 kg
Deck extension
1.22m roll-out, 136kgRoll-out deck for reaching over an edge; its own lower rating applies.

Environment

Power
ElectricZero emissions and quiet: suits occupied buildings and after-hours work. Charges from a 10 A wall socket.
Indoor / outdoor
IndoorAs rated by the manufacturer. Wind ratings still apply outdoors.
Tyres
Non-marking solidNon-marking: safe on finished floors.

Transport

Weight
2,135 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform3 specs
Working height
9.82 m
Platform height
7.82 m
Extension deck
1.22m roll-out, 136kg
Capacity1 spec
Platform capacity
454 kg
Dimensions2 specs
Overall width
1.19 m
Turning radius
2.64 m
Performance4 specs
Gradeability
25 %
Terrain type
Indoor / hard standing
Indoor use
Yes
Outdoor use
Limited
Power & drive4 specs
Power source
Electric
Battery
24V DC
Drive type
2WD
Tyre type
Non-marking solid
Machine & transport5 specs
Manufacturer
Skyjack
Model
SJ4726
Machine weight
2,135 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Dimensions at a glance

Platform 7.82 m Working 9.82 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
1.19 m: needs double doors or gate access

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Comparable machines

Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given, we will confirm the fit before hire.

  • Genie 26ft electric scissor lift
  • JLG 26ft electric scissor lift
  • Haulotte 26ft electric scissor lift
  • Sinoboom 26ft electric scissor lift
  • Dingli 26ft electric scissor lift

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Power

Charging this machine

Battery electric, charged from a normal household power point.

Swipe

Batteries

24V DC

Maintenance-free batteries

Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.

Charges from a normal 10 amp wall plug

The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire.

Overnight charge, full day’s work

About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Confirm the floor

A ground-bearing slab is fine. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Get a quote for the Skyjack SJ4726 Electric Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote