0472 721 234 Get a Quote

Tracked / self-levelling

Athena 870 BL EVO Tracked Scissor Lift

Long-term hireFrom $140/day on a hire of 3 months or longer What the rate covers

Almac Athena 870 BL EVO

19ft tracked bi-levelling scissor lift with 7.9 m working height and 250 kg on a full 1.50 by 1.20 m basket. Diesel drive for soft and sloping ground, or mains electric on a 15 amp lead for indoor work.

Machine availability and transport are confirmed as part of your quote. An enquiry is not a booking.

Long-term hire

19ft Tracked Scissor Lift

From $140/day on 3+ month hire

Minimum hire 3 months or longer

Tracked for lawns, pavers and soft ground, on one clear long-term rate with no insurance, environmental or hire levies added.

Working height
7.9 m
Platform capacity
250 kg
  • No insurance levy
  • No environmental levy
  • No hire levy

Any delivery and collection is quoted upfront.

Working height
7.9 m
Platform capacity
250 kg
Platform height
5.9 m
Transport
Pickup: confirmation required
Specification sheetPDF, 705 KB, Almac Athena 870 BL EVO
Download Specification sheet

Overview

About the Athena 870 BL EVO Tracked Scissor Lift

The Almac Athena 870 BL EVO is a crawler (tracked) scissor lift with proactive bi-levelling: it keeps the basket level on slopes and uneven ground while rubber tracks spread the load on soft or finished surfaces. 7.9m working height, 5.9m platform floor and a 250kg two-operator basket measuring a full 1.50 x 1.20m — noticeably more room than the 850 BL. Standard drive is a Kubota Z482 diesel, with a 220V 2.2kW electric motor and a 220V 1kW generator available. Levelling range is plus or minus 16 degrees longitudinal at the front, 20 degrees at the rear and 15 degrees laterally. 2,460kg.

Download spec sheet (PDF)

Athena 870 BL EVO Tracked Scissor Lift working on site

Where it works

Best-fit jobs and sites

  • Sloping and uneven ground, landscaping and grounds maintenance, soft or sensitive surfaces, jobs needing a full-size basket where a wheeled machine cannot go.

Good to confirm: Tracked repositioning is slower than wheeled. Electric running is tethered and needs a 15 amp supply on a lead, because there is no on-board battery: if a 15 amp outlet is not within reach of the work area the machine runs on the Kubota diesel instead, so confirm the power before an indoor or enclosed job. Confirm the surface rating before tracking over finished ground. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Decision panel

Will it suit this job?

Seven questions, answered from this machine’s verified specifications. 5 still to confirm with the hire team.

Manufacturer spec sheet

Reach

Working height
7.9 mWhere your hands work with the operator standing on the platform. Size the machine on this figure.
Platform height
5.9 mThe platform floor at full height, about 2 m below working height.

Access

Machine width
Confirm
Stowed height
Confirm
Length
Confirm

Surface

Ground it suits
Tracked / self-levellingRubber tracks spread the weight: lawns, pavers and soft or uneven ground within the machine's rated slope.
Gradeability
Confirm
Outriggers
NoStabilisers the machine sets down before it lifts, where fitted.

Load

Platform capacity
250 kg

Environment

Power
Bi-energy (mains electric or diesel)Zero emissions and quiet: suits occupied buildings and after-hours work. Charges from a 10 A wall socket.
Indoor / outdoor
OutdoorAs rated by the manufacturer. Wind ratings still apply outdoors.

Transport

Weight
2,460 kg
Customer pickup
ConfirmNot yet decided for this machine: Pickup has not been decided for this machine. Delivery is always available.

Compliance

Competency
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply.No high-risk work licence applies to scissor or vertical lifts in NSW at any height. Site inductions still apply.
Documents
Manufacturer spec sheet on fileThe sheet governs every figure above.

A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.

Specifications

Full specifications

Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.

Reach & platform2 specs
Working height
7.9 m
Platform height
5.9 m
Capacity1 spec
Platform capacity
250 kg
Performance3 specs
Terrain type
Tracked / self-levelling
Indoor use
Limited
Outdoor use
Yes
Power & drive2 specs
Power source
Bi-energy (mains electric or diesel)
Drive type
Tracked
Machine & transport5 specs
Manufacturer
Almac
Model
Athena 870 BL EVO
Machine weight
2,460 kg
Customer pickup
Confirmation required, delivery always available
Delivery
Quoted by suburb & access

Transport

Getting it to site

Swipe

Delivered by us

Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.

Customer pickup, confirmation required

Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.

Logistics

Delivery, access and running

What we need from you, and what we take care of.

Swipe

Delivery

Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.

Tightest access width

Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.

Licence and competency

Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency. Diesel site rules apply.

Hire period

Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.

Not sure it will fit?

Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.

Power

Charging this machine

Battery electric, charged from a normal household power point.

Swipe

Maintenance-free batteries

Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.

Charges from a normal 10 amp wall plug

The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire.

Overnight charge, full day’s work

About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.

Keeping it charged on site

  • Confirm a live, accessible power point near where the machine parks overnight. A machine left away from power starts tomorrow flat.
  • Plug in at the end of every shift, not “when it gets low”. Topping up at breaks helps on heavy days.
  • Charge in a ventilated area and keep the charger and lead dry.
  • Zero emissions and quiet running, so it suits indoor, occupied and after-hours work.

Safety

Pre-start checks, every day

Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.

Swipe

1

Walk around

0/4
2

Power on

0/3
3

Function test

0/3

Found a fault?

Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.

What counts as the record

Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.

Site prep

Before it arrives

Five minutes of checking here is what keeps a delivery from becoming a return trip.

Swipe

1

Measure the route, not the door

Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.

2

Plan the track path

Tracks are gentle on surfaces, but confirm pavers, pit lids and irrigation lines on the route can take the machine’s weight.

3

Clear the work zone

Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.

4

Make delivery space

Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

5

Find the power point

A live outlet near overnight parking so every day starts on a full charge.

Avoid

Mistakes we see weekly

The things that most often send a machine back or hold up a job.

Swipe

Booking on ceiling height

Measure to the actual task height, then choose the machine. Nothing added “just in case”.

Using the nominal door size

An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.

Assuming it can cross a bit of lawn

Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.

Leaving inductions to delivery morning

Shopping centres and managed sites need the paperwork approved before the truck arrives.

Documents

You might also consider

Get a quote for the Athena 870 BL EVO Tracked Scissor Lift

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote