Indoor / hard standing
Skyjack SJIII 3219
19ft electric scissor lift, 7.79m working height, 227kg, 0.81m wide with a 0.91m roll-out deck and zero inside turning radius.
Overview
The Skyjack SJIII 3219 is a 19ft electric scissor lift built for tight indoor work: 7.79m working height, 5.79m platform height, 227kg capacity, 0.81m overall width and 90-degree steering that gives a zero inside turning radius. A 0.91m roll-out extension deck adds reach without adding footprint, and the 0.66 x 1.63m platform stows to 1.64m with the rails down so it fits through low doorways and into goods lifts. 1,557kg, 25% gradeability, 250Ah batteries. Two people at zero wind rating, one at 12.5 m/s.
Where it works
Good to confirm: Hard-surface machine on firm level ground only. Platform capacity drops to one person in wind up to 12.5 m/s. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.
Decision panel
Seven questions, answered from this machine’s verified specifications. 3 still to confirm with the hire team.
A Confirm mark means the decisive figure is not on this record. Send us the site details and we will answer it before quoting; we never guess a specification.
Specifications
Grouped for quick scanning. A row appears once its figure is verified for this machine; anything not listed here is not yet on the record, and the Fit & access panel above marks it Confirm. The manufacturer spec sheet always takes precedence.
Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.
Transport
Swipe
Quoted by suburb, machine and access. We plan the truck, the unloading space and any overhead hazards before the run, tell us about docks, tight driveways and height limits when you book.
Customer pickup has not been confirmed for this machine. Delivery is always available and is quoted together with the hire; if you would rather collect, ask the team and they will confirm whether a trailer combination is approved for it.
Logistics
What we need from you, and what we take care of.
Swipe
Quoted by suburb, site access and transport requirements, the machine and the delivery are quoted together for your dates.
Tell us the narrowest gate, doorway or gap the machine must pass through and we will confirm the fit before it is loaded.
Scissor-type EWP. No high-risk work licence required in NSW; EWPA Yellow Card (SL) accepted competency.
Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together, see our hire terms for responsibilities during the hire.
Send your suburb, your dates and the tightest access width. We will confirm the machine and quote the delivery with it.
Power
Battery electric, charged from a normal household power point.
Swipe
250Ah
Sealed and maintenance free: no topping up with water, no battery servicing to arrange during your hire.
The charger is onboard. Plug it into any standard 10 A / 240 V power point, no three-phase, no site power upgrade and no separate charger to hire.
About 8 hours from flat. Runtime on the day depends on battery condition, drive distance and lift cycles, so tell us if the job runs long shifts.
Safety
Every Equip Hire machine is function-tested before it leaves the yard. The operator still checks it before each shift, tick these off as you go.
Swipe
Tag it out and call us on 0472 721 234. Never operate a machine with a known fault, we will repair or swap it.
Ticking here is a memory aid on your phone, nothing is stored. The machine’s own logbook and pre-start check sheet are the record. Based on the manufacturer’s daily check requirements and SafeWork NSW guidance for this kind of equipment.
Site prep
Five minutes of checking here is what keeps a delivery from becoming a return trip.
Swipe
Every gate, corridor and lift on the way to the work area. Handles, hinges, bollards and stored materials all eat clearance.
A ground-bearing slab is fine. Suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.
Overhead services, sprinkler heads and light fittings at working height, and an exclusion zone for people below.
Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.
A live outlet near overnight parking so every day starts on a full charge.
Avoid
The things that most often send a machine back or hold up a job.
Swipe
Measure to the actual task height, then choose the machine. Nothing added “just in case”.
An 820 mm door leaf is not 820 mm of clear opening once the stop and hardware are counted. Measure the gap.
Wheeled machines rut turf and bog in soft ground. Say so when you book and we will send a tracked machine.
Shopping centres and managed sites need the paperwork approved before the truck arrives.
Electric Scissor Lifts
Haulotte Compact 8N
26ft narrow electric scissor lift, 9.8m working height, 250kg, 0.81m wide — 26ft of reach through a standard doorway.
Electric Scissor Lifts
Skyjack SJIII 3226
26ft narrow electric scissor lift, 9.75m working height, 227kg, 0.81m wide with a 0.91m roll-out deck.
Electric Scissor Lifts
Zoomlion ZS0808AC
26ft narrow electric scissor lift for greater working height through standard doorways — indoor and hard-surface work.
Compare all electric scissor lifts or browse the full fleet.
Tell us the job, the dates and the suburb. We will quote the machine and delivery together.
Your download has started
Working height, not platform height
This machine is rated at 7.79 m (about 26 feet). Working height is what a person can reach from the platform, not the height of the platform floor. The difference is roughly two metres, and it is the figure most quotes get wrong.
A spec sheet answers what the machine does. It cannot tell you whether it fits your gate, your ground or your slab, so ask us. Two details is enough.
We will come back to you on the details you gave. Your PDF has downloaded already.
Get a hire quote for this machine
