Indoor / hard standing
LGMG M0810JE Vertical Mast Lift
LGMG M0810JE
33ft vertical mast lift with a jib — 10m working height, 3.2m horizontal outreach, zero tail swing and a 1m wide chassis for indoor up-and-over work.
Working height
10 m
Platform height
8 m
Power
Electric
Width
1 m
Specification sheetDownload Specification sheet
Also available to buy
LGMG M0810JE Vertical Mast Lift For Sale
Machines sell subject to prior sale. Condition, hours and price are confirmed on enquiry; no finance, warranty or delivery is included unless agreed in writing.
Price
Price on application
Enquire About This Machine
Send us your requirements and an Equip Hire equipment expert will contact you to confirm whether this machine is suitable for your application.
All machines for saleOverview
About the LGMG M0810JE Vertical Mast Lift
The LGMG M0810JE is a self-propelled vertical mast lift with an articulating jib. It reaches a 10m working height (8m platform height) and 3.2m horizontal outreach, with 6.6m of up-and-over clearance — so it works around racking, ductwork and plant that stop a straight-up scissor lift. Zero tail swing and a 345-degree turntable let it work hard against walls and in aisles, and the chassis is only 1m wide and 1.99m high stowed, so it drives through standard doorways and fits in a goods lift. Electric 24V drive with solid non-marking tyres, full-height drive, proportional controls and AC power to the platform. Platform capacity is 200kg, two people indoors or one working off the platform.
Features
What sets it apart
- 10m working height, 8m platform height
- 3.2m horizontal outreach with 6.6m up-and-over clearance
- Zero tail swing and 345 degree turntable rotation
- 1m wide and 1.99m stowed — through a standard doorway
- Full-height drive with proportional controls
- AC power to the platform
- Solid non-marking tyres, 24V 250Ah electric drive
Where it works
Best-fit jobs and sites
- Indoor maintenance around racking and plant; electrical, lighting and services work; warehouse and factory fit-outs; up-and-over access in aisles where a scissor lift cannot reach.
Good to confirm: 200kg platform capacity — lighter than a scissor lift of the same height. Solid non-marking tyres and 100mm ground clearance: firm, level surfaces only. Not a rough-terrain machine. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.
Specifications
Full specifications
Grouped for quick scanning — a row appears once its figure is verified for this machine. The manufacturer spec sheet always takes precedence.
Reach & platform2 specs
- Working height
- 10 m
- Platform height
- 8 m
Capacity1 spec
- Platform capacity
- 200
Dimensions1 spec
- Overall width
- 1 m
Performance4 specs
- Gradeability
- 25
- Terrain type
- Indoor / hard standing
- Indoor use
- Yes
- Outdoor use
- Limited
Power & drive4 specs
- Power source
- Electric
- Battery
- 24V 250Ah
- Drive type
- 2WD
- Tyre type
- Non-marking solid
Machine & transport5 specs
- Manufacturer
- LGMG
- Model
- M0810JE
- Machine weight
- 2720
- Customer pickup
- Delivery only
- Delivery
- Quoted by suburb & access
Dimensions at a glance
The numbers that decide access
- Machine width
- 1 m: needs double doors or gate access
Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.
Comparable machines
Working to a spec that names another brand? This machine sits in the same class as the models below. Compare the verified figures above against the specification you have been given — we will confirm the fit before hire.
- Haulotte Star 10 vertical mast lift
- JLG Toucan mast boom lift
- Manitou 100 VJR vertical mast lift
- Genie vertical mast lift
- Skyjack vertical mast lift
- Sinoboom vertical mast lift
Delivery, access and running
Delivery is quoted by suburb, site access and transport requirements. Tell us the tightest access width on site if the machine must pass through gates, doorways or between structures.
Licence and competency: Boom-type EWP with a working height under 11m — no high-risk work licence required in NSW. EWPA Yellow Card (boom / vertical lift) is the accepted operator competency, and a harness with lanyard must be worn in the platform.
Hire period: Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together; see our hire terms for responsibilities during the hire.
Charging this machine
- Batteries
- 24V 250Ah
- Our fleet guidance
- Charge overnight (about 8 hours) from a standard outlet for a full day's work. Runtime depends on battery condition, drive distance and lift cycles. Ask us if your job runs long shifts.
- Confirm a live, accessible power outlet near where the machine parks each night. A machine left away from power starts tomorrow flat.
- Plug in at the end of every shift, not "when it gets low"; opportunity charging at breaks helps on heavy days.
- Charge in a ventilated area and keep the charger connections dry.
Pre-start checks, every day
Every Equip Hire machine is function-tested before delivery, and every operator still checks the machine before each shift. This is the baseline we use; the machine's own logbook and check sheet govern.
Walk around
- Tyres, wheels and structure: damage, cracks, leaks
- Scissor stack / boom, pins and hoses: no visible damage or hydraulic leaks
- Decals, capacity plate and rails in place; gates close properly
- Work area: overhead power lines, holes, slopes, other traffic
Power on
- Battery state of charge: enough for the shift
- Ground and platform controls both operate correctly
- Emergency stop and horn work from both stations
Function test
- Raise, lower and drive at low height before working
- Emergency lowering: know where it is and that it works
- Tilt / overload alarms not showing faults
Any fault: tag it out and call us on 0472 721 234. Do not operate a machine with a known fault. Based on manufacturer pre-start requirements and SafeWork NSW guidance.
Before it arrives
- Measure the route, not the door. Every gate, corridor and lift on the way to the work area: handles, hinges, bollards and stored materials all eat clearance.
- Confirm the floor. Ground-bearing slab is fine; suspended slabs, mezzanines and raised floors need the wheel loads checked against the floor rating.
- Clear the work zone. Overhead services, sprinkler heads and light fittings at working height; exclusion for people below.
- Delivery space. Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.
- Power point. A live outlet near overnight parking, so every day starts charged.
Mistakes we see weekly
- Booking on ceiling height instead of the actual task height. Measure to the work, then add nothing "just in case".
- Quoting the nominal door size instead of the clear opening. An 820 mm door leaf are not 820 mm once the door stop is counted.
- Assuming the machine can cross "a bit of lawn". Wheeled machines rut turf and bog in soft ground; say so and we'll send tracks.
- Leaving induction and permit requirements to delivery morning. Shopping centres and managed sites need paperwork before the truck arrives.
Documents
You might also consider
Planning guides
Get a quote for the LGMG M0810JE Vertical Mast Lift
Tell us the job, the dates and the suburb. We will quote the machine and delivery together.