0472 721 234 Get a Quote

Rough terrain // 4WD

45ft Articulating Boom Lift Hire – Skyjack SJ45 AJ+

Skyjack SJ45 AJ+

45ft diesel articulating boom lift, 15.54m working height, 6.93m outreach, 300kg — reaches up and over on rough ground with 4WD.

Working height
15.54 m
Platform height
13.72 m
Power
Diesel
Width
2.29 m
Specification sheetDownload Specification sheet

Overview

About the 45ft Articulating Boom Lift Hire – Skyjack SJ45 AJ+

Skyjack SJ45 AJ+ Articulating Boom Lift
Skyjack SJ45 AJ+ Articulating Boom Lift view 2
Skyjack SJ45 AJ+ Articulating Boom Lift view 3
Skyjack SJ45 AJ+ Articulating Boom Lift view 4

The Skyjack SJ45 AJ+ is a diesel articulating (knuckle) boom lift with a 15.54m working height, 6.93m horizontal outreach and 7.45m up-and-over clearance. The 300kg (660lb) platform takes two workers plus tools; AXLDRIVE axle-based 4WD, 40% gradeability and EASYDRIVE direction-sensing controls handle rough, uneven ground. Drivable at full height.

Download spec sheet (PDF)

45ft Articulating Boom Lift Hire – Skyjack SJ45 AJ+ working on site

Where it works

Best-fit jobs and sites

  • Reaching over structures and landscaping, external building maintenance, steelwork and access on rough terrain.

Good to confirm: Diesel engine — outdoor use only. Needs firm site access for a rough-terrain boom. An online listing cannot replace a site assessment, so tell us the job and we will confirm suitability.

Specifications

Full specifications

Grouped for quick scanning — a row appears once its figure is verified for this machine. The manufacturer spec sheet always takes precedence.

Reach & platform2 specs
Working height
15.54 m
Platform height
13.72 m
Capacity1 spec
Platform capacity
300
Dimensions1 spec
Overall width
2.29 m
Performance4 specs
Gradeability
40
Terrain type
Rough terrain // 4WD
Indoor use
No
Outdoor use
Yes
Power & drive3 specs
Power source
Diesel
Drive type
4WD
Tyre type
Solid
Machine & transport4 specs
Manufacturer
Skyjack
Model
SJ45 AJ+
Customer pickup
Delivery only
Delivery
Quoted by suburb & access

Dimensions at a glance

Platform 13.72 m Working 15.54 m
Working height is reach with an operator standing on the platform

The numbers that decide access

Machine width
2.29 m: large machine, so plan vehicle-width access

Drawn to scale from this machine's stored specifications. The manufacturer spec sheet (below) governs.

Delivery, access and running

Delivery is quoted by suburb, site access and transport requirements. Tell us the tightest access width on site if the machine must pass through gates, doorways or between structures.
Licence and competency: Boom-type EWP. WP-class high-risk work licence required in NSW (boom 11m+); harness with lanyard mandatory in the basket.
Hire period: Hire runs from delivery or pickup until off-hire is confirmed. Rates are quoted for your dates, suburb and machine together; see our hire terms for responsibilities during the hire.

Pre-start checks, every day

Every Equip Hire machine is function-tested before delivery, and every operator still checks the machine before each shift. This is the baseline we use; the machine's own logbook and check sheet govern.

Walk around

  • Tyres / tracks, wheels and structure: damage, cracks, leaks
  • Scissor stack / boom, pins and hoses: no visible damage or hydraulic leaks
  • Decals, capacity plate and rails in place; gates close properly
  • Work area: overhead power lines, holes, slopes, other traffic

Power on

  • Fuel level, engine oil and coolant
  • Ground and platform controls both operate correctly
  • Emergency stop and horn work from both stations

Function test

  • Raise, lower and drive at low height before working
  • Emergency lowering: know where it is and that it works
  • Tilt / overload alarms not showing faults
  • Harness on, lanyard to the rated anchor point: mandatory in the basket

Any fault: tag it out and call us on 0472 721 234. Do not operate a machine with a known fault. Based on manufacturer pre-start requirements and SafeWork NSW guidance.

Before it arrives

  • Measure the route, not the door. Every gate, corridor and lift on the way to the work area: handles, hinges, bollards and stored materials all eat clearance.
  • Walk the ground. Compacted and trafficable beats "looks firm", so mark soft spots, trenches and services before the machine tracks over them.
  • Clear the work zone. Overhead services, sprinkler heads and light fittings at working height; exclusion for people below.
  • Delivery space. Room for the truck to stop and unload safely. Tell us about docks, driveways and height limits when you book.

Mistakes we see weekly

  • Booking on ceiling height instead of the actual task height. Measure to the work, then add nothing "just in case".
  • Quoting the nominal door size instead of the clear opening. An 820 mm door leaf are not 820 mm once the door stop is counted.
  • Treating a rough-terrain machine as an indoor unit. The tyres mark floors and the engine can't run enclosed.
  • Leaving induction and permit requirements to delivery morning. Shopping centres and managed sites need paperwork before the truck arrives.

Documents

You might also consider

Get a quote for the 45ft Articulating Boom Lift Hire – Skyjack SJ45 AJ+

Tell us the job, the dates and the suburb. We will quote the machine and delivery together.

CallGet Hire Quote