# 32ft and 33ft Scissor Lift Guide: Electric, Narrow and Rough Terrain

> Canonical page: https://equiphire.com.au/32ft-33ft-scissor-lift-guide/. Last updated 15 November 2026.

Quick answer: The 32ft and 33ft scissor lift classes cover several different access problems. Some machines are electric scissors for suitable firm surfaces, one is a narrow electric alternative, and others are rough terrain models for appropriately assessed outdoor sites. Grouping them by height helps you compare, but it does not make them interchangeable.

For work around this class, begin with the highest task and then decide how the machine will get to it. The route, ground and available standing area can eliminate an otherwise attractive option before price or brand enters the decision.

## Electric models for taller overhead work

The Skyjack SJ4732, Genie GS-3246 and Haulotte Compact 12 are electric candidates to compare for warehouse, services and fit-out tasks. Their exact working heights, widths, deck layouts and ratings should be checked for the supplied unit.

Do not assume that a 32ft label is a precise reach specification. Small differences matter when a job is close to a model's usable limit. Describe the task and allow the selection to be made against verified model information.

## Narrow chassis does not describe the whole footprint

The Genie GS-3232 provides a different access proposition from the wider electric options. It belongs on the shortlist when the route is restrictive, subject to the complete travel and operating requirements.

In particular, check the permitted set-up and levelling arrangement. A machine's stowed chassis width is not the only dimension that matters while it is operating. Send photographs showing the working area as well as the opening.

## Rough terrain choices need a site assessment

The Skyjack SJ6832 RT, LGMG SR1018D, Genie GS-3369 RT and Haulotte Compact 12 DX form the rough terrain shortlist in the current catalogue. Compare them against ground support, access, deck requirements and the actual work position.

Rough terrain does not mean unrestricted operation on a slope or permission to stand on uncertain ground. Travel capability and the conditions for raising the platform are separate checks. Identify slopes, drains, excavations, fill and areas where the surface changes.

## Machines to hire

Model | Why shortlist it |

Skyjack SJ4732 | Skyjack SJ4732, an electric candidate for overhead work on suitable surfaces: 9.65m platform and 11.65m working height on Skyjack's Australian specification. |

Genie GS-3246 | Genie GS-3246, an electric option to compare for route dimensions and platform arrangement. |

Genie GS-3232 | Genie GS-3232, the narrow-chassis alternative. Assess its operating and levelling footprint as well as the route width. |

Haulotte Compact 12 | Haulotte Compact 12, another electric shortlist for taller indoor work where its full dimensions suit the route. |

Skyjack SJ6832 RT | Skyjack SJ6832 RT, a rough terrain candidate for a site where its chassis, supporting surface and permitted configuration fit. |

LGMG SR1018D | LGMG SR1018D, the listed 33ft rough terrain option, to compare on set-up, access and platform requirements. |

Genie GS-3369 RT | Genie GS-3369 RT, an alternative rough terrain model for the same measured job and site conditions. |

Haulotte Compact 12 DX | Haulotte Compact 12 DX, a diesel rough terrain alternative to assess against the actual work and route. |

## Compare the complete working arrangement

Consider where the machine will move during the day and whether other trades will block its route. For electrical or mechanical installation, establish how permitted tools and materials will be carried and staged. Confirm the load on any extension deck.

For a large warehouse or construction stage, the most practical machine may reduce repositioning and awkward material handling. That decision still depends on the machine's intended use and operating limits, not simply choosing the largest platform in the group.

## Common questions

Is 33ft always higher than 32ft? Compare the verified working heights. Nominal class names and the model details are different pieces of information.

Can an electric model replace a rough terrain one? Only if the surface, environment and full operating requirements are appropriate for that electric unit.

Will the narrow model fit and operate in the same space? Confirm the complete operating footprint, including any required supports or levelling arrangement.

## Sources

- [SafeWork NSW, Code of Practice: Elevating work platforms](https://www.safework.nsw.gov.au/__data/assets/pdf_file/0009/1416474/Elevating_work_platforms-COP.pdf): support surface, selection and safe use
- Manufacturer specification sheets for each machine named, linked from its machine page

Read the rough terrain customer job for a real example, then request a model shortlist. Call 0472 721 234.

---
Markdown copy of https://equiphire.com.au/32ft-33ft-scissor-lift-guide/ (the HTML page is canonical). Generated 2026-11-18T17:57:02+00:00. Index: https://equiphire.com.au/llms.txt
