# 2.5 Tonne Telehandler Guide: Compact 6m-Class Machines Compared

> Canonical page: https://equiphire.com.au/2-5-tonne-telehandler-guide/. Last updated 15 November 2026.

Quick answer: A compact 2.5 tonne telehandler can be useful where materials need to be placed beyond the straight vertical lifting arrangement of a conventional forklift. Equip Hire lists the Dieci Apollo 25.6 and LGMG H625 in this class.

These are commonly discussed as compact 6m-class machines, but the actual lift-height figures matter. The catalogue lists 5.78m for the Dieci and 5.94m for the H625. A project requiring a genuine 6.0m lift must be checked against the actual task rather than satisfied by rounding a model into a convenient class name.

## Start with the load, not the headline capacity

Establish the load's actual weight, dimensions and centre of gravity. Include packaging, pallets and the intended attachment. Then provide the required placement height and horizontal distance.

The 2.5 tonne headline is not a promise that the machine can carry that load at maximum height or maximum reach. The selected unit's load chart and attachment configuration determine the relevant capability at the required point.

## Compare the compact machines on the same task

The Apollo 25.6 and H625 should be compared against the same load and placement positions. Small differences in geometry or dimensions may matter at a tight site, while a different load centre can change what appears possible from the headline rating.

Describe where the machine must stand and whether it can approach the placement point directly. If it must remain behind a wall, edge or obstruction, show that constraint on a photograph or plan.

## Measure access and ground conditions

Check gates, height restrictions, turning areas and the route between unloading and placement. A compact telehandler still needs a suitable surface and operating arrangement for the load being handled.

Explain slopes, uncertain ground, changes in level and any nearby excavations. Include the actual space available to manoeuvre with the load. Width and height alone do not describe the route.

## Machines to hire

Model | Why shortlist it |

Dieci Apollo 25.6 | Dieci Apollo 25.6, a compact 2.5 tonne candidate. Check its actual load chart, lifting height, attachment and route for the proposed task. |

LGMG H625 | LGMG H625, the other listed compact 2.5 tonne option. Compare the verified lift height and load-at-reach requirements with the same job. |

## Make a project quote useful

Send the load weight and dimensions, required height and reach, suburb, expected period and any attachment requirement. Add delivery windows and access restrictions.

For a long hire or tender, ask the team to state included hours, excess-hour arrangements, servicing, breakdown process, replacement arrangements and applicable insurance or damage terms in the written quote. These are questions to confirm, not inclusions to assume from a machine page.

## Common questions

Can a 2.5 tonne telehandler lift 2.5 tonnes anywhere in its range? No. Use the actual load chart for the required position and attachment.

Is a 6m-class label enough for a 6m specification? No. Confirm the exact required height and the model's actual limit.

Which compact model is better? The better fit is the one whose verified load, geometry and route requirements suit the job.

## Sources

- Manufacturer specification sheets and load charts for each machine named, linked from its machine page

For a heavier load or a higher placement, see the 3 tonne telehandler guide. Send the load and placement details for a quote, or compare telehandlers and forklifts. Call 0472 721 234.

---
Markdown copy of https://equiphire.com.au/2-5-tonne-telehandler-guide/ (the HTML page is canonical). Generated 2026-11-18T17:56:55+00:00. Index: https://equiphire.com.au/llms.txt
