# 10m Mast Lift Guide: Understanding 26ft Platform and 33ft Working Height

> Canonical page: https://equiphire.com.au/10m-vertical-mast-lift-guide/. Last updated 15 November 2026.

Quick answer: A 10m mast lift with a jib can provide compact up-and-over access where a straight mast or a scissor cannot place the platform correctly. Equip Hire lists the Haulotte Star 10 and LGMG M0810JE as options to compare.

This class also illustrates why the height label matters. LGMG specifies 10m working height and 8m raised platform height for the M0810JE. That is approximately 33ft working height and 26ft platform height. Those descriptions refer to different measurements of the same machine, not two different sizes of mast lift.

## Why a jib changes the choice

A jibbed mast can position its platform beyond some obstructions rather than lifting only vertically. That can be useful around racking, fixed plant and maintenance areas where the base cannot stand directly below the task.

Measure the required height and horizontal distance, along with the obstacle's dimensions. The platform needs an appropriate path and working point within the actual model's envelope. A maximum outreach figure is not a promise of the same reach at every height.

## Compare the Star 10 and M0810JE

Use the actual working envelope, stowed dimensions, platform arrangement and operating requirements. Similar headline heights do not establish the same clearance or movement.

Explain any confined aisle, corner or overhead structure. Check the space needed for the machine and its moving parts, not just the narrowest chassis dimension. A compact footprint still needs a suitable operating area.

## Floors and access need independent checks

Jibbed mast lifts are substantial machines. Do not infer that they can use a lift or suspended floor because their chassis appears compact. Obtain the relevant machine information for the building's assessment.

Follow the route from unloading to the work. Measure door clearances, turns, thresholds and overhead restrictions. Keep the route out available as work is completed or stock is moved.

## Machines to hire

Model | Why shortlist it |

Haulotte Star 10 | Haulotte Star 10, the listed jibbed mast candidate for compact up-and-over access where the actual envelope and site conditions fit. |

LGMG M0810JE | LGMG M0810JE, an 8m platform (26ft class) with 10m working height and 3.2m outreach. Its page address still says 33ft, which is the working height, not the platform. |

## Give the team the actual maintenance problem

Send photographs showing where the base can stand, what it must reach past and the point to be worked on. Add the suburb, likely dates, work environment and any floor restrictions.

If a suitable clear position exists below the work, a scissor may be worth comparing. If more horizontal reach is needed, an appropriate boom may be the better candidate. The useful choice follows the working position rather than the name mast lift.

## Common questions

Is the M0810JE a 33ft platform-height machine? The manufacturer specifies an 8m platform and 10m working height. The 33ft description corresponds to working height.

Can either machine work anywhere a narrow scissor fits? Check length, turns, operating space and the actual reach arrangement, not width alone.

Can the maximum height and outreach be combined? Check the selected model's operating envelope for the required platform position.

## Sources

- [SafeWork NSW, Code of Practice: Elevating work platforms](https://www.safework.nsw.gov.au/__data/assets/pdf_file/0009/1416474/Elevating_work_platforms-COP.pdf): support surface, selection and safe use
- Manufacturer specification sheets for each machine named, linked from its machine page

Ask Equip Hire to compare the two mast lifts for your access problem. Call 0472 721 234.

---
Markdown copy of https://equiphire.com.au/10m-vertical-mast-lift-guide/ (the HTML page is canonical). Generated 2026-11-18T17:56:59+00:00. Index: https://equiphire.com.au/llms.txt
